Question about RCA Universal Remote Control

1 Answer

New rca universal remote will not work

Just bought the rca rcr311w universal remote today to control a funai sv2000 tv/dvd combo model # wv2005 with rca jacks located on the front of the tv for a vcr or game system. followed the instructions for the remote, but can't seem to get it programed. does anyone know the tv/dvd code for this remote?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1203 worked for me

Posted on Feb 02, 2012

3 Suggested Answers

aprmaejun
  • 97 Answers

SOURCE: RCA RCR311W Universal Remote Code for LXI TV

From what I can tell, it could be any of these codes:

1000
1006
1048
1049
1062
1072
1073
1100
1109
1130
1162
1181
1203
1212
1233

I used this website:
http://tv.rca.com/RCATV/NewTV/Templates/GenericSupport.aspx?NRMODE=Published&NRORIGINALURL=%2fen-us%2ftechnicalsupport%2ehtml&NRNODEGUID=%7bCDBA69CE-8CEA-435A-8F62-C5E6DBE1ACF6%7d&NRCACHEHINT=NoModifyGuest#

Posted on Jun 12, 2008

MNfisherman
  • 11896 Answers

SOURCE: Cannot find remote code for panasonic TV/VCR combo for RCA remote

Here is a list of codes for your remote. Please follow any of the links below to get your codes.
Results 1 - 10 of about 324,000 for rca universal remote codes. (0.26 seconds)
Search Results

  1. RCA Universal Remote Control-Programming Codes RCA Universal Remote Control-Programming Codes. ... The remote may already be set up to operate your brand of TV, VCR, or Cable Box. ...
    www.thompsontv.com/rcarc.html - 33k - Cached - Similar pages -
  2. How to Program an RCA Universal Remote Without a "Code Search ... wikiHow article about How to Program an RCA Universal Remote Without a.
    www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button - 42k - Cached - Similar pages -
  3. Universal Remote Control Codes Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For All and more.
    www.xdiv.com/remotes/ - 73k - Cached - Similar pages -

Posted on May 05, 2009

asnowman
  • 788 Answers

SOURCE: where is the code search button on the rca univ. remote, rcr311w?

You can download the manual at the following link.
It is kind of a big file, so it may take a while.
http://www.retrevo.com/support/RCA-RCR311W-Universal-Remotes-manual/id/402ci571/t/2/

Just click on the get manual and then download.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I have managed to answer your questions and have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot give this post a “FIXYA” (Two Thumbs Up) rating then please comment to this post and I will try to help you further.

I try to provide the best FixYa experience.

Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I Need A Remote Code For An Emerson EWC19T5 and One For All URC 4021 remote


Hello
Setup codes for Emerson Tv with One For All URC-4021 remote control are:

0154, 0236, 0463, 0180, 0178,
0171, 0623

The One For All 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable

box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:

[1] Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

[2] On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After programming

a DVD Combo device, you will be able to control channel selection,

volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

[3] Press and hold SET until the LED (red light) blinks twice,
then release SET.

[4] Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,
the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

[5] Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
OK.

Sep 26, 2011 | One For All URC-3021 Remote Control

1 Answer

Need code for SV2000 tv/dvd combo & Comcast remote,


Any remote supporting Sylvania TV/DVD combos will work for these tvs. I had a Zenith universal remote working with this TV.

Nov 26, 2009 | One For All URC-4021 Remote Control

1 Answer

I have a SV2000 TV/DVD combo. I am unable to find the remote forit. I have a universal remote I can program to the TV, but need the codes. Can you help? Thanks.


Any remote supporting Sylvania TV/DVD combos will work for these tvs. I had a Zenith universal remote working with this TV.

Oct 24, 2009 | Remote Controls

2 Answers

Need the code to program a sv2000 tv using a rca universal remote


SV2000 is Funai Electric and codes for Funai if digital converter box for Comcase (5 digits) are: 11963, 10180, 10171, 10179, 11904

Aug 13, 2009 | RCA Remote Controls

1 Answer

Direct tv on universal remote


For this type of problem you will need to call the RCA customer support at this telephone number 1-800-645-4994. Give them the model number of your remote control and ask them for assistance with your problem. Thank you for using FixYa and have a nice day!

Apr 04, 2009 | RCA 3-Device Universal Remote with...

3 Answers

SV2000 tv/dvd code


the code for the SV2000 using a oneforall remote is 0456

Jul 08, 2008 | One For All URC-4021 Remote Control

Not finding what you are looking for?
Remote Controls Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a RCA Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...