Question about Flat Panel Televisions

3 Answers

I PURCHASED A MAGNAVOX TB110MW9 CONVERTER BOX FROM WALMART. I HOOKED IT UP. IT SCANNED THE CHANNELS BUT IT KEEP SAYING NO SIGNAL.

Posted by on

  • arwsgirl Feb 18, 2009

    I just hooked up my converter today and I got "No Signal" after I scanned the channels. What's up? It's the 18th.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Magnavox TB110MW9A converter box that has worked fine for the last 8 months. Now you turn it on, the light blinks 31 times, stays on and there's nothing on the screen! The remote does nothing. (yes, I put new batteries in)

Posted on Dec 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Most local stations have been broadcasting the digital signals for several years now, and as of today nearly 100% of all TV stations are already broadcasting digital signals along with the analog signals. The February deadline was for analog signals to stop, NOT for digital signals to start.

If you haven't been getting any digital stations at all, either (1) you have no antenna, or a bad antenna hookup, or (2) you have a defective unit.

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

I don't believe anybody is transmitting yet until the deadline is up. Feb. 17th I think. Try until after.

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have problem with many channels while a converter box is fine


Ur tv problems it is the tv antena signal problems.Tries websites like Amazon.com,Ebay.com or Walmart stores to buy a Digital design antena and used it will have no more problems with weak signal or no signal for tv broadcasting channels.

Jun 23, 2011 | Philips Magnavox 52MF437S/37 52 in. LCD TV

1 Answer

I have a 19" magnavox


Do you have a digital converter box. If not, you need to get one to receive the analog channels.

Feb 06, 2011 | Flat Panel Televisions

2 Answers

New tv. won't work


Press the input button and select where you have the satellite plugged in.

Aug 12, 2009 | Dynex DX-LCD19-09 19 in. LCD TV

3 Answers

Samsung lcd tv is saying low or weak signal when trying to tune it in


you can only use your tv to scan for channels with an antenna or if you have that tv hooked to cable television. use your Directv receiver to scan for channels, if you have an antenna hooked up to it. --------------- click this link for more help http://www.highdefforum.com/directv-forum/77638-new-lcd-tv-d-sd-no-weak-signal.html thaNKS.

Jul 11, 2009 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

Dish Network Channels Work but Local Television Channels Do Not


Do you have an antenna hooked up? You'll need one hooked to your converter box because the digital signal is so much more difficult to tune in to. This may help:

www.antennaweb.org

If you live closer than 15 miles, rabbit ears
If you live closer than 20 miles, omnidirectional
If you live closer than 50 miles, midrange outdoor (oldschool arial w/ rotator)
Further than 80 miles, you'll need a long range with rotator, perhaps even an amplifier to go with it. Print off what your results were on antenna web and bring it to a RadioShack or a local antenna store and they should be able to point you to the right antenna for your particular location.

Apr 21, 2009 | Sony KDL46S3000 46 in. LCD HDTV

1 Answer

I have a Westinghouse 26 inch TV. Model # SK-26H590D. It will not scan channel 9. I have tried both the automatic scan and the find channel scan. It is hooked to a Phillips Mant 510 vhf/uhf indoor antenna...


I carried my Westinghouse TV to the basement. Unplugged the antenna from the digital converter box and connected it to my digital TV. I then re-scanned for channels and found channel 9. After carrying the Westinghouse TV back upstairs, I connected the original set-up and tuned to channel 9 which was now showing on the screen as no signal. From that point I moved my VHF dipoles until I had located the correct position for reception. A little labor intensive, but I was fortunate to have another antenna that was receiving channel 9.

Feb 19, 2009 | Westinghouse SK-26H590D Television

1 Answer

Off and on signal


Welcome to the world of digital broadcasting. Chances are the antenna isn't positioned quite right for the station that's giving you trouble. It's not a TV issue or problem with the converter since other channels are fine, so it comes down to signal strength. Most of the time it's okay, but sometimes when band conditions change it gets weak enough that the converter box can't tune it. You might try shifting the antenna slightly while noting signal strength on the different channels. You'll likely find a few degrees change may give you a reliable signal on the problem channel without noticeable reduction in the others.

Feb 12, 2009 | Emerson EWL20D6 Television

1 Answer

Analog/Digital


HDLCD2600 come set for cable. Make sure the tv is set for "tv" or "air" then run the auto channel memory or search feature of the set. If you have the manual it's under "memorizing channels". If your still have problems, call Sansui TV's customer service number 800 289 0980.

Nov 04, 2008 | Sansui HDLCD-2600 26 in. LCD Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

1,068 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...