Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint wf840 first the door won't open,then there is water inside and is displaying F-05

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

F05 meas not drained. usually due to a blockage in your filter.
you will need to get the water out by holding the drain hose lower than the machine into a basin. when drained the door can be opened. unscrew the filter and check for coins/socks etc.

Posted on Jan 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer (hotpoint ultra silent wf840) is displaying f-08 on it's digital display, can anyone help please.


The meaning of F08 is that the heater relay is stuck or cannot be activated for some reason, this has the effect of stopping the water heater from working.
In order to resolve this the only thing you can do is to test the heater, and see if it is o/k.,if it is , then you there is not much else you can do, except call an engineer.

Feb 23, 2011 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Washing maching displaying a code F- 05 and door wont open. Looks like it hasn't spun either. What is going on?


Hello,An F-05 means that the pressure switch is jammed on empty or a problem with pump.
The fault is associated with drain out (pump blocked or restricted in some way).
Small panel at rear of machine reveals the pump, pull of the two pipes (Plastic clips hard to get off, slide them sideways), remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left, pump can then easily be cleaned.

Thanks

May 23, 2010 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Hotpoint ultima wf840, what does this mean F-05


F05 means that the pump is not getting rid of the water.
You to locate and clean the filter, and or check the pump for a blockage or restriction.

Apr 30, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint wf840 displays h20 all the time


This is indicating a problem with the water supply to the washer.
Check inllet hose/s, make sure they are not kinked or restricted , make sure tap/s are fully turned on.
Make sure water presure is o/k.

Mar 18, 2010 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

I have a hotpoint WF840 error code F-05 how do I check pump for blockage and how do I empty machine of all clothes as door lock will not release?


remove drain hose from pipe at back and drain all the water in to a bucket or bowel this will take 2/3 goes then the door will open.your problem is the filter or pump is blocked check filter first its at botton of machine mbehind a panel it just pulls off

Mar 03, 2010 | Washing Machines

1 Answer

Hotpoint ultima wf840 drum jammed display saying error code f 02 can any 1 help


Error F-02 is a slow drain problem. Undo and remove the wide tapering pipe from the bottom of the drum to the pump. Inside you will find a non return ball valve, clean this and your problem should be solved

Jan 08, 2010 | Hotpoint Ultima WF840 Front Load Washer /...

4 Answers

Hotpoint wf840 displays "test"


Try This - It works for the Washer Dryers so it May work on your Washer.

  1. Press the Start/Cancel button until all the console Led's Illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme
Hope this Helps.

Mar 12, 2008 | Hotpoint Ultima WF840 Front Load Washer /...

3 Answers

Hotpoint ultima wt741


washing machine WT741 ultima all light are flashing and it won't do anything else

Nov 12, 2007 | Washing Machines

1 Answer

Displays F-03


NTC fault its electronic and needs engineer
But try this for most electronical faults first switch off mains wait 20secs and switch back on this resets most gadgets and gizmos if it doesn't work it was a free try.

Nov 07, 2007 | Hotpoint Ultima WF840 Front Load Washer /...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

47 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...