Question about Gateway DC-T50 Digital Camera

2 Answers

Dc-t50 does not have menu to cancel protect on memory card

I found that I could not delete pictures from the 256MB memory card. When in the camera, I receive memory protect. Using the Users Guide, I found that my camera doesn't have the required choices once the memory is protected.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Http://www.rekam.ru/drivers/dcj01x.bin
Download the firmware above... Copy it to a freshly formated by the camera SD card..  hold the up arrow for all 3 100%'s  turn the camera on it takes 2 min  

Posted on May 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Gateway Master
  • 96,733 Answers

SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to unlock a photo in camara


The protect function allows a user to protect a picture from accidental deletion. To unprotect a picture on your camera, scroll to the protected picture that you want to delete, then press the Menu button (the button to the right of the Play button.) Scroll down the menu and you should come to an option that allows you to Protect/Unprotect the picture. Since your picture is currently protected, deselect that option. You should then be able to delete the picture normally.

Alternatively, you could also format the memory card, however this deletes ALL photos and data you have on the memory card. If you are trying to completely clear the memory, this is the best way. After turning on your camera, simply press the Menu button, scroll to Setup, then scroll down to Format. Select Format, it will ask you if you want to format the memory card, or the camera's built-in memory. Format whichever one you want to clear, if you are using a memory card then your pictures are stored on the memory card. It will take a few seconds to format.

Hope this helps.

Dec 05, 2012 | Kodak EasyShare M1033 Digital Camera

1 Answer

HI I NEED TO KNOW WHAT TYPE OF MEMORY CARD SHOULD I USE FOR THE DC-T50 THANKS


Hi, The DC-T50 only takes regular SD cards up to 512 MB in space. Most cards that are sold now are SDHC, which are NOT compatible. If you can find a 512MB SD card, it should be extremely cheap.
Happy Shooting!

Mar 05, 2011 | Gateway DC-T50 Digital Camera

1 Answer

FORMAT ERROR shows up in the window. Cannot take pictures, or review shots. Gateway DC-T50 Digital Camera The problem occurred after I tried to hook it up to my Mac computer to download pictures which I...


Hi,

Remove the batteries wait a few minutes. Put fresh batteries back in and turn the camera on. This resets the camera.Then remove the memory card from the slot from your camera. Then insert back and check you will not be getting this error.

If still there is some problem, take the memory card out and copy the pictures from the memory card to system and then format it. Insert the card back to the camera. You won't get the format error.


Hope this helps.

If you still have any queries feel free to ask us.

Shane

Feb 18, 2011 | Gateway DC-T50 Digital Camera

1 Answer

When i delete or take a picture it says protected card


Is there a slide switch on the side of the card? Move it.

Dec 28, 2009 | Gateway DC-T50 Digital Camera

1 Answer

It say "card protected"


Write Protection: There is a tab on the memory card so you will you need to remove it from the camera and change the position of this tab to "unlock" it.

Dec 14, 2008 | Gateway DC-T50 Digital Camera

1 Answer

Dc-t50 won't transfer pictures onto my computer


Hey roboticgirl,
What is most likely causing this are the drivers that run the included software have either been accidentally deleted or they need to be updated. I would reinstall the software that came with the camera, or you could purchase a card reader and upload your pictures to your computer that way which should not require any drivers other than the ones in your operating system. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

Jun 12, 2008 | Gateway DC-T50 Digital Camera

2 Answers

Gateway Camera DC-T50


Check memory card from computer with card reader.
If that doesn`t help.
Try formatting memory card from camera or from computer (it will destroy data on card).
Most likely your pictures are alredy lost.

Feb 13, 2008 | Gateway DC-T50 Digital Camera

1 Answer

I have a gatway dc-t50 cant get the word potected off the memory card


Hello:  I have this Camera And i FIXED this issue today. There is a Firmware for the camera it is called dcj01x.bin  I had to download it from a russian site.  here is the download link http://www.rekam.ru/drivers/dcj01x.bin  after you download it. format you SD card and put it on it. NOT through the USB camera cable... use a full battery Put the card in the camera, dial to A ,press AND HOLD the up arrow,  KEEP HOLDING IT... PRess the power button.. it will begin the firmware update.. 1st erase then, program, then verify.  after all 3 are 100% let up the up arrow and cycle power. you'll see v.38 ...  you now take faster clearer and YES every time pictures .... YA 

hope this helps   ..

PS the Toshiba firmware will not work... it is for a sony coms   the dc-t50 has a sharp...   

Feb 06, 2008 | Gateway Pocket DV-S20 Digital Camera

1 Answer

When swithched on the camera getting message protected card and unable to shoot photos


Try to slide the little switch on the side of the card in the other direction. That switch is like a write protect for the card. Good Luck.

Nov 16, 2007 | Gateway DC-T50 Digital Camera

1 Answer

Gateway DC-T50 digital camera 5.25 megapixels


Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. you need professional service to fix it .

Sep 07, 2007 | Gateway DC-T50 Digital Camera

Not finding what you are looking for?
Gateway DC-T50 Digital Camera Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Digital Cameras Experts

kakima

Level 3 Expert

96699 Answers

Steve

Level 3 Expert

3287 Answers

Fred Block
Fred Block

Level 2 Expert

289 Answers

Are you a Gateway Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...