Question about HP DeskJet 710c InkJet Printer

1 Answer

The printer will not turn on

The green light blinks but the printer does not work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

They have problem trouble lost cant find read cd wont open lost it

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1102 reser counter


  • I take it you are refilling the toner cartridge...
  • Switch the printer off.
  • Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.
  • Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.
  • Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.
  • Open and close the lid of HP printer once. The light will start blinking.
  • Press the green button. Your HP toner cartridge chip will be reset.
  • Apr 25, 2014 | HEWLETT-PACKARD Hewlett Packard P1102...

    1 Answer

    Is not working more


    Switch the printer off.

    Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.

    Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.

    Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.

    Open and close the lid of HP printer once. The light will start blinking.

    Press the green button. Your HP toner cartridge chip will be reset.

    Jan 29, 2013 | HP DeskJet F4280 All In One Printer InkJet

    1 Answer

    Green light working continously


    It might be you change your cartridge to that and you did not insert it properly so that they blink. Try to check the cartridge if it can insert properly then restart your printer and try to print it again. If they are blinking again just press the reset button or turned off your printer then turned it on again and try to print.

    May 29, 2010 | Canon PIXMA MX320 Color USB InkJet Printer

    5 Answers

    My ML1610 Samsung printer is not working. The red and green light are blinking simultaneusly and cancel button is struck. How can I set it right?


    My ML1610 Samsung printer is not working. The red and green light are blinking simultaneusly and cancel button is struck. How can I set it right?

    Dec 15, 2009 | Samsung ML 1610 Laser Printer

    1 Answer

    On off light blinkinking from green to red and I


    Canon IP3000 INK counter reset
    Can gave it a go may work

    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not,
    press the Power button once more.
    8. Your printer should respond as normal..

    Dec 14, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

    1 Answer

    Konica Minolta 2400W Magicolor. Error light blinking


    Ready indicator Error indicator Condition Action
    Green Orange
    Blinking Blinking Communication Check The Printer
    error cable
    ____________________________
    Print over-run Turn off the printer.
    After a few seconds
    turn on the printer
    change to a lower
    resolution.
    ________________________________________________________



    This may help if not...let me know........Whytfang

    Mar 25, 2009 | Konica Minolta magicolor 2400 Laser...

    2 Answers

    Canon i550 printer stoipped printing


    My cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker.

    Oct 09, 2008 | Canon BubbleJet i550 InkJet Printer

    1 Answer

    Printer will not respond


    Canon S330 Turn off printer
    Hold down Resume button and press Power button.
    Keep holding down Power button and let Resume button go.
    Press Resume button 2 times then let BOTH buttons go.
    Green lights will flash and then stop blinking.
    When green lights are solid, press the Resume button 4 times.
    Press the Power button and the printer should turn off, if not, press the Power button once more.
    Your printer should respond as normal

    Jul 22, 2008 | Canon S 330 InkJet Printer

    1 Answer

    Canon i560 printer


    I have similar problem. I found this solution that may help you. My problem insists tho.

    >>> 5 flashes indicates a faulty printhead or possibly a problem with the p/head contacts. Try removing the head which is easier if you take the cartridges out first(no tools required) and re-seat it having checked the contacts for dirt.

    If that doesn't work it may be that the waste ink tank is full. Try this ...
    Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.

    May 28, 2008 | Canon BubbleJet i560 InkJet Printer

    2 Answers

    PRINTER LIGHTS BLINKING RED THEN GREEN


    Either you have ran out of an ink, because some epsons wont run until you replace cartridge, you have a document pending a print, or you need to disconnect printer, uninstall drivers from Add/emove programmes. Re-install driver then re connect printer when prompted

    Nov 10, 2006 | Epson Stylus Color 760 InkJet Printer

    Not finding what you are looking for?
    HP DeskJet 710c InkJet Printer Logo

    Related Topics:

    43 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Printers & Copiers Experts

    kakima

    Level 3 Expert

    96627 Answers

    k24674

    Level 3 Expert

    7987 Answers

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...