Question about Olympus Camedia C-60 Zoom Digital Camera

1 Answer

WILL NOT POWER ON

SECOND TIME I HAD TO POST THIS THERES BEEN NO RESPONSE

Posted by on

  • Nicole Webster Jul 12, 2007

    As I stated before there's never been anything liquid or damaging in the battery compartment.
    It closes firmly.
    Neither the battery that came with the camera originally, nor the new one which is same brand, type, etc work- despite both being fully charged.
    I could not contact customer support- eveyr time I entered my info on the website, it said one of the fields had an illegal character. They didn't say which or what it was but none should have appeared as such.
    Our cell phones are on the fritz and we couldn't call.
    We bought this on clearance back in 2005, and come to think of it, we never recieved the rebate though all the forms were correctly filled out and it was mailed with a computer printed envelope, complete with bar code.
    Shame since this camera was the best choice we had then, and still is now- when camera shopping for my mother, we got a Kodak EasyShare and it's horrible quality, not good enough for small details on collectibles. I'd like to get the same camera as a replacement but I'm afraid it'll do the same thing, again without provocation.
    Thanks anyways but I guess I'm SOL.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Check battery compartment. Clean the terminals in the bottom with an eraser on the end of a pencil. Make sure the compartment door is a firm closure- press it closed to ensure contact. Of course the batteries have to be up to scratch and of the correct specification Still in trouble? have contacted the Olympus Tech Support Team? If it of recent purchase send it back to vendor. Do not go for the repair route - those prices are not commercial at all- better the new camera.

Posted on Jul 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a SyncMaster 2232BW monitor hooked to my pc, the blue power button comes on when power on, my computer POST appears for about a second then vanishes leaving only bright lights on display, none of...


Seems that you may have the wrong type of video selection theres a button for auto sensing the type of connection. if your video cable is blue then you have an analog connection, white video cable is a digital connection you just need to ensure that the monitor is set to the proper selection.

Sep 05, 2011 | Samsung SyncMaster 2233BW 22" LCD Monitor

1 Answer

Camera on Motorola RAZR V3x


Hi moses219....full use of these features are dependant upon your carrier/service provider. Please update your post with the name of your Service Provider, and the complete model number of your phone in it's entirety. Also include in your post the list of accessories that you received with your phone. Please be detailed in your response as each seller provides some variation or another in supplied items with each sale. Even if you're unable to transmit photos or video due to limitations in your service contract, we can still apply 3rd party software to activate these features for storage on your phone/computer transer provided you have the neccessary supplied cable(s).....awaiting your update

Aug 11, 2007 | Motorola Mobility RAZR V3x Cellular Phone

1 Answer

Having wiring problem on 1970 amc javelin v8 need to see wiring diagram where the selonoil is under hood inside right fender need to know how many wires from selonoid and where they go thanks


Yeah, You're right on the position of the solenoid, and you hook the side large post to the hot post of the battery with large cable, and the large post on other side of solenoid to the starter with the large cable. The single wire that comes from the starter switch goes on the small post to the front, and if theres a second small post, it doesn't have to nave a wire on it, but normally it is a power cutout to other things that are not needed to be powered when cranking. Use a test light and have someone crank the engine over to test and see for sure which wire is the one coming from the switch before you connect it.

Apr 25, 2011 | AMC Eagle Cars & Trucks

1 Answer

SHUTDOWN ALL OF A SUDDEN WHEN I'M CHEKING MY EMAIL, I TURN IT ON, STAYS ON, CAN'T BOOT, INSERTED OS TO FIX IT BUT JUST SPIN AND STOP, POWER STAYS ON AND FANS ARE NOT MOVING, BLINKING LIGHT IN MOTHERBOARD,...


what hardware have you replaced? do you hear a beeping sound? try removing everything (HDD, DVD/CD/FLOPPY/)except the proc,video card and mem on the motherboard and try to boot. check if it will give you bios. if it still the same, do an isolation test. the main reason why its not responding is your computer doesnt complete POST. POST is one of the process the computer do to test all the hardware that is connected on the motherboard, if one fails and POST doesnt complete, you wont see the BIOS startup screen. Theres a lot of possible fault on this concern. since theres a lot of things connected on the motherboard

Mar 27, 2011 | Gateway Profile® 6C (PROFILE6C) PC Desktop

1 Answer

Hp blue light on ac plug is on, when power button is pushed lights come on for a second then nothing, tried removing battery and pressing power button for 40 seconds, no response. Is the mother board bad?


Im afraid that is a motherboard failure. A few months ago I had one in for repair with the same symptoms. Tried reflowing the graphic chip, nothing Tried reflowing the FSB controller chip, nothing. Tested power module for bad capacitors, nothing.
You could do the same steps I did, maybe you get lucky.

If this post was helpful and informative please give it a Thumb Up. Thank you.

Jan 19, 2011 | HP Pavilion dv9000z Notebook

1 Answer

I HAVE A RCA HDTV THAT IS A YEAR OLD ALL OF THE SUDDEN WHEN I GO TO TURN IT ON THE RED LIGHT NEXT TO THE POWER BUTTON JUST BLINKS THEN THERES NOTHING IT WONT EVEN TURN ON


I will need to know the model number of your RCA to help you, also how many times does the light blink or is it constantly blinking? Respond to this post so I will know which response your refering to as I get alot of requests.

Jun 20, 2008 | Televison & Video

1 Answer

Haier air conditioner


On the Compressor? - Theres a run (R) that gets the red wire from the run capacitor or line side voltage, theres a start (S) that gets the yellow wire from start capacitor and theres a common (C) that gets the black wire which connects to neutral or common. If you ohm it out to identify the terminals the highest resistance is between (S) and (R) second is between (S) and (C) and least resistances is between (R) and (C). Hope this helped. GL!

Jun 14, 2008 | Haier Preference Plus HWR24VCA Air...

1 Answer

Locked tv


Unplug the unit for 5 minutes... After you plug it back in try to power it up. If it won't power-up it's not the result of any lock feature you have another problem... If it powers up and Smartlock is on try this:
The entry code for AutoLock (Magnavox SmartLock) to reset the password code number is 0711 twice.
However, if 0711 is entered just once, the response to first time will be "INCORRECT". If the word INCORRECT is allowed to time out then the second entry of 0711 is not accepted.
To avoid this response when the first 0711 responds with INCORRECT, Immediately enter 0711 a second time. It will then ask for the new code.
Enter the new code and confirm it (2nd time) and proceed to set the blocking as desired.
If you want to purchase a remote for it try here: http://remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m1=27ms343s&uuid=12091926696600

Good Luck!
Bill

Apr 26, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

No picture on screen, chirping noise every second from back


again a good set the deflection modules on these sets are pretty reasonable you need to have a tech swap it but i highly suggest that than a new one the chirping is the set trying to start up but going into shut down

Dec 02, 2007 | Samsung HC-P5241W 52" Rear Projection...

Not finding what you are looking for?
Olympus Camedia C-60 Zoom Digital Camera Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...