Question about Furuno 1715 LCD Radar System GPS Receiver
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
internal damage to the display, fixable by Furuno, and probably economically feasible (guess $250 with round trip to Furuno)
Posted on Jan 13, 2010
If you have no radar targets, go to longest range 24 miles, gain full, rain and sea minimum, do you have noise, if so, need magnetron, if not, need cable from display to dome.
Posted on Feb 10, 2010
SOURCE: Furuno 1715 gives
Heading pulse is a reed switch sensor built inside the dome. upon each rotation of the array the reed switch is activated. Do a visual inspection of your array (inside) to make sure it is spinning (verify from a distance). Don't get eye level with the rotating array it can cause great harm to your eyes. Normally I have seen the belt slip off and also the lanyard attachment get caught in the array. Check those two things as well.
Posted on Mar 09, 2010
Testimonial: "It was a failed reed switch. Replaced and it works well. Thanks."
Tips for a great answer:
Feb 24, 2014 | Furuno GPS
Mar 06, 2010 | Furuno 1715 LCD Radar System GPS Receiver
Jan 14, 2010 | Furuno 1715 7" Monochrome Lcd 2.2kw Radar...
Nov 17, 2009 | Furuno 1715 LCD Radar System GPS Receiver
May 21, 2012 | Furuno 1715 LCD Radar System GPS Receiver
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: