Question about Mitsubishi WD-52525 52" Rear Projection HDTV
Every time I turn on my tv it just turns right back off?? do you know what it could be?
Cutta, you will most often hear a click on boot then the fans start up and lamp will then fire. The picture will start to show up....at what point does it shut off? and do you hear a click when the tv is turning off? Is it the complete tv shutting down, fans and everything that turns off? Do you see any lights on the the front panel "POWER", "STATUS" or "LAMP", what are they doing? If you see a Power, Status or Lamp light after it shuts off the below are what they mean if there is an issue. POWER - STATUS - LAMP - CONDITION/ISSUE: Off - Yellow - Off - Temp. high/dirty filter/excess room temp Off - Off - Yellow - 4000 hrs. Lamp usage warning Off - Off - Blink Yellow - Lamp Cover open Off - Blink Yellow - Off - Air Filter Cover open Off - Off - Red - Lamp failure (failed to turn On or broken) Off - Blink Red - Off - Fan Has Stopped Off - Red - Off - Circuit failure (short) or DVI cable disconnected If you want to check for the last "Error Code", after you first turn the TV on, by pressing the front panel ?DEVICE? and ?MENU? buttons at the same time and holding them for 5 seconds, it activates the Error Code Mode. The ?Power LED Light? blinks/flashes (1/2 sec delay) and then flashes again denoting a two digit Error Code indicating no problem or an error has occured since the last Initalization. i.e. "Power light" blinks 3 times (1/2 second delay) and then blinks 4 times then 1 sec delay and repeats a few times. This would mean "Error 34 - Lamp abnormality". See below for error codes..... Error Code - Description or issue 12 - No Error detected, check Power Supply 32 - Lamp Cover is open 33 - Air Filter Cover is open 34 - Lamp abnormality 36 - Light Engine (DMD or LAMP Fan stopped) 37 - Exhaust or Lamp Ballast Fan stopped 38 - Lamp temperature high 39 - DMD temperature high 41 - Short is detected 44 - DVI cable between FMT & Engine disconnected. Sorry for the long answer but it was an open ended question.
Posted on Jul 12, 2007
I am getting the lamp abnormaily error , tv turns on i get sound but i get no picture , i have a new bulb , what else could it be , i check the ballast plug , im not sure how the connection should be , im told to check the voltage on the pcb but i have no idea what that means,
Posted on Dec 14, 2007
I am also getting the code 34 , with no sound and no video, what should I do next?
Posted on Aug 05, 2008
Tips for a great answer:
Sep 10, 2011 | Akai PT4298HD Rear Projection Television
Aug 12, 2010 | Mitsubishi WS-55511 55" Rear Projection...
Mar 13, 2010 | Mitsubishi WD-52525 52" Rear Projection...
Sep 23, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...
May 10, 2009 | Mitsubishi VS-50501 50" Rear Projection...
Dec 20, 2008 | Projection Televisions
May 28, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...
4,274 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: