Question about HP Compaq Evo W6000 PC Desktop

2 Answers

PC will not boot, power button flashes red

I have a Compaq EVO W6000 that will not power up. The power button flashes red and the ethernet port shows activity.

Posted by on

  • 2 more comments 
  • mabailey Jan 24, 2009

    I have not made any changes, the fans are not running

  • mabailey Jan 24, 2009

    I have changed the power supply, but now there is no light to the power button or ethernet port

  • mabailey Jan 24, 2009

    The new power supply fan does not spin up at all.

  • DEKR
    DEKR May 11, 2010

    have you made any changes

    like memory or windows

    can you hear fans running

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The W6000 have a very sensitive RAM layout make sure they are installed securely with one of the following layouts.

Ram, blanking plate, blanking plate, blanking plate.
Ram, blanking plate, Ram ,blanking plate.
RAM,RAM,RAM,RAM.
as the machine uses RD-RAM there can be no gaps in the memory circuite and can cause it to power up then down.

Also ,
I know this is slightly off topic but as you also ave a compaq evo w6000 do you have the windows xp recovery disc that came with it as i can not locate mine i am willing to pay via palpal to any one who can send me an ISO image of the recovery disk. My skype account name is CKDS-Broadband if anyone can help me find this disk please add me and i will discuss it over skype messenger with you.

Steve

Posted on Feb 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • HP Master
  • 1,102 Answers

YOUR POWER SUPPLY HAS MORE THEN LIKELY GONE
remove your power supply and take it to a pc repair store they should test it for you on the spot at no cost most of them do.
To replace depending on what you need there about 40.00

Posted on Jan 24, 2009

  • DEKR
    DEKR Jan 24, 2009

    Okay if you me the light on the eternet card unplug modem for about one minute then after you plug it back in if ther is still no light see if your network shows in control panel network connections if network shows right click if you see word Enable then click to enable

    if not then click Repair if all this does'nt help let me know

    let me know

  • DEKR
    DEKR Jan 24, 2009

    then you don't have the power supply plugged in right

    does everything else turn on do you have another pc you can test the power supply on

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start up


hi , Reuben

I would suggest you try safe mode.
Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words "Safe Mode" appear in the corners of the display to identify which Windows mode you are using. If an existing problem does not reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
If you don't know the cause of the problem, you can use the process of elimination to help you find the problem. Try starting all of the programs you commonly use, including the programs in your Startup folder, one by one, to see if a program might be the cause of the problem.
Follow the steps to boot the computer in safe mode with networking:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode with Networking and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Logon to your computer using an account with Administrator privileges.

May 27, 2015 | Computers & Internet

1 Answer

How to hard reset a WM8880 laptop


Power the unit off (holding power buttom) and selecting Power off, then simultaneously hold the "back" button and on button for about 8 seconds. When the android icon appears, press back buttom, in the menu select wipe data/factory reset pressing the home buttom and then press the back buttom, in the next screen select "yes delete all user data" pressing back buttom, and in the next screen select "reboot system now" with the back buttom and wait.

Nov 29, 2014 | Computers & Internet

1 Answer

What software should I use to bypass my university internet restrictions?


If the games are in fact, "yours" then you can configure your game server to publish on the normal HTTP port (80). Then, you will have no trouble at all.

I hope this is helpful,
--Robert

Oct 29, 2014 | Computers & Internet

1 Answer

My SONY VGN-N 130 G Screen Shows sony logo and freeze can not go to home page or any functions ?


Try boot it up by pressing F12 and enter secure mode. Then you shoose "repair". Petter

Oct 17, 2014 | Computers & Internet

1 Answer

I can't hook my monitor up to my pc I have a dell optiplex gx620 Sff


On the back of your PC there is a blue 15 pin video connection. Connect your monitor to this video connector, power up your monitor the boot up your PC.

Mar 23, 2013 | Computers & Internet

2 Answers

Www.hp.com/go/techcenter/startup


My computer is appear " The System BIOS has detected that your notebook PC was not into hibernation or shutdown to avoid overheating.The system is now operating normally.
Overheating may occur if the cooling vents are blocked or the operating temperature exceeds the specification.The notebook PC should return to normal operation once the situation is resolved."
System temperature (90D)

Apr 08, 2012 | Computers & Internet

2 Answers

Freezes on the warm boot screen MC9000


This can be for a number of reasons.

First thing would be to try and cold boot the device:-

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger

If that fails next thing would be to try and re-flash the operating system. This is done by using an SD card and loading the latest operating files onto it. The SD card slot is located under the keypad. A cross head screwdriver is required to remove the keypad. Search on symbol software download site for the latest. The download also has a readme with detailed instructions. Once the files are on perform a cold boot.

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger. Drop the terminal in a cradle so that it runs on external power.

Hope this helps.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Dec 09, 2009 | Symbol MC9000-G Portable Terminal

2 Answers

How do i turn my bluetooth on?acer aspire 5044wlmi


For Acep Aspire 504x model systems that have Bluetooth built in, there is an on/off switch located in the front of the system.

For systems with bluetooth built in there will be two buttons next to each other just left of the mic and headphone ports.

The left of the 2 buttons is the bluetooth switch and the right of the 2 buttons is for 802.11 wireless.

If you only have 1 button then you do not have bluetooth built-in. You can also check to see if bluetooth is included by looking at the bottom, if Bluetooth is installed there will be a white FCC lebel with the name Bluetooth written on it.

Nov 18, 2009 | Computers & Internet

1 Answer

Mouse and keyboard have no power


If your mouse and keyboard work properly with another computer or laptop the problem could be :
A) if devices are USB :
- defective USB port : chose another USB port;
- USB port inactivated in BIOS : check and activate;
- motherboard defective : replace motherboard.
B) if devices are PS/2 :
- damaged PS/2 ports : buy a PS/2 to USB adapter for your mouse/keyboard or buy USB mouse and keyboard;
- motherboard defective : replace it.

Oct 04, 2009 | Computers & Internet

Not finding what you are looking for?
HP Compaq Evo W6000 PC Desktop Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18354 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...