Question about Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Hoover Windtunnel Bagged upright vacuum is smoking and belt is slitting and burning

The belt is slitting and would not move chaned the both belts with geniune hoover belts changed both filters and put a new bag on. Now when plugged in keeps smoking and belts are slitting and small back is burning will move now but belt is smoking and burning. ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 91 Answers

You probably need to replace your brushroll seeing that your belt is burning means motor is turning. first check you brushroll and see if there is an obstruction keeping it from spinning if its not spinning freely replace

Posted on Jan 16, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 240 Answers

SOURCE: Hoover Ultra U6430-900 WindTunnel Bagged

The wider belt is # 38528035,( package # 40201170 ), and the v-belt is # 38528034, ( package # 40201200 ). The wide belt should be replaced twice as often as the v-belt.

Posted on Jul 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Upright Hoover Elite. Can't get belt back on right.


The belt loops over the motor shaft and the brush roller. Verify that the arrows on the end caps of the brush roller are facing DOWN or you will be doing the job over again. Start with the motor shaft and stretch the belt to allow the brush roller to seat. A new belt can require a strong pull on the brush roller to get it seated.

Nov 16, 2016 | Hoover Vacuums

1 Answer

Drive belt on Hoover U6434 keeps slipping off. Even new ones.


Check the motor shaft for residue from a previously burned belt. Also the brush roller may be defective.

Jun 08, 2014 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Hoover does not 'hoover' properly


If it has a power nozzle you should replace the belt.

Dec 18, 2013 | Miele Blue Moon Bagged Canister Vacuum

1 Answer

Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum what belt # do I need both belt # please


The wider belt is # 38528035,( package # 40201170 ), and the v-belt is # 38528034, ( package # 40201200 ). The wide belt should be replaced twice as often as the v-belt.

Jul 06, 2011 | Hoover Ultra U6430-900 WindTunnel Bagged...

1 Answer

My Hoover upright model 6437-900 makes a distressed sound when I turn it on and it also burns rubber. The roller turns. I've checked the thick black belt and it's intact, but has lots of 'pitting'. ...


It certainly sounds as though the belt needs replacement. (Part # 38528035) If the belt has stretched, it will slip, causing a burning rubber odor. Get a new belt and compare it to the used one.

Feb 22, 2011 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Hoover self-propelled windtunnel U6430-900 flat belt gets hot & becomes hard to push. It has a filter bag. Purchased 8/2/01. Took one plate off bottom. Used a compressor to blow out dirt & dust. ...


Belts get hot when fibers from carpet get wound arounf the belts mounting shaft. Best to take a razor and cut off any fibers so the belt doesn't get hot again

Aug 10, 2010 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

How to change the V belt on hoover wind tunnel U6435-900 ?


Below I have listed a link to the manual which has instructions and a link to the V belt you need.

Windtunnel Manual

Windtunnel Replacement Belts

Nov 03, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...