Question about Jack Lalanne Health Master 100 Blender 8-Speed Blender

3 Answers

HEALTHMASTER 100, CAME APART IN 8 MONTHS.

I ORDERED A HEALTHMASTER 100 ON APRIL 24, 2008. LAST WEEK, I PUT IN SALAD INGREDIENTS, AND SPARKS BEGAN TO FLY. IT TURNS OUT THE BLADE CAME LOOSE, LEAKED UNDER THE BLENDER AND SPILLER OVER INTO THE MOTOR. I CALLED THE COMPANY THREE TIMES, AND THEY FINALLY TOLD ME THE BLENDER IS NOT IN STOCK AND TO CALL BACK IN 4-5 WEEKS, AND SINCE I DID NOT BUY THE WARRANTY IT CANNOT BE REPLACED

Posted by on

  • Anonymous Mar 12, 2014

    HOW TO PUT BLADE ASSEMBLY BACK ON. I HAVE ALL THE PARTS. PLEASE HELP. THANKS

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I have been thru the fire about this! I sent my Healthmaster in recd another and it failed also. Almost always..it is the bearing that fails in the caraffe that supports the blade. The bearings that Jack Lalanne had installed in China..were not sealed...so they would allow water to enter corrode and eventually all of your blenders contents would come out thru the bottom! Or another thing that can happen is your blade will freeze up due to corrosion....and become immovable.
Jack Lalanne healthmaster is out of business. I manged to get a refund form Tristar..lalannes distributor..BECAUSE they authorized me sending my belnder back for a new one...and then they cashed my shipping check and then threw out my blender!!!!! I also had to call for weeks till I drove Tristar insane...so they ponied up teh dough
So I doubt you can receive any money.
But this is what you CAN do!
1) If your motor functions well..you can buy a new carafe for 45 dollars or so from Cooking toys ( google cooking toys and it should come up)
2) OR if your cheap like me...and your blade doesnt rotate easily due to corrosion and your caraffe isnt leaking much...put a couple drops of oil on the outter rim of the bearing ( That would be located directly on the bottom of the outside of the caraffe..it surrounds the knurled metal part that is inserted in the motor for blending.
My blade was corroded and leaking a tiny bit..I put some olive oil on the bearing and it worked great! I have ben able to use my caraffe for a month now...when I expected to have to buy a new one from "Cooking Toys" Which I will do if this one fails.
3) If you buy a new caraffe form cooking toys..my advice? OIL THE BEARING WITH A LITTLE OIL...(any kind of vegetable oil) AFTER EACH TIME YOU USE IT! I SUSPECT IT WILL LAST INDEFINITELY>>>BUT TIME WILL TELL!

Posted on Feb 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

JACK LALANNE NO LONGER HAS A WEBSITE FOR THE HEALTHMASTER. I CHECKED ON HIS JUICEMAKER SITE WHICH ONCE RECOMMENDED THE HM, AND IT'S NO LONGER THERE. A NUMBER OF STORES WERE LISTED FOR THE HM., SUCH AS TARGET. I CHECKED THE SITES OF THE STORES MENTIONED, AND THEY SAY IT IS NO LONGER AVAILABLE. WHEN I PHONED HM, I WAS TOLD THAT IT HAS NOT BEEN AVAILABLE FOR 10 MONTHS. I ASKED WHY I WAS SOLD ONE 9 MONTHS AGO IF IT WAS NOT AVAILABLE, AND WHY ARE THEY STILL HAWKING ON TV 24/7 AS MANY AS 3 CHANNELS PER HOUR. APPARENTLY THE CUSTOMER SERVICE PEOPLE ARE NOT
UP-TO-DATE. OBVIOUSLY THE LAW HAS BEEN BROKEN IF THEY WERE SELLING A DEFECTIVE PRODUCT, SO I CONSULTED A LAWYER, AND AM REFERRING THE MATTER TO THE BETTER BUSINESS BUREAU.

Posted on Jan 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I WAS MAKING A SMOOTHIE TODAY ON APRIL THE THE WHOLE BOTTOM OF MY JUICE JUST RAN OUT OF THE BOTTOM OF MY JUICER I LOVE THIS HEALTHMASTER100 CAN IT BE FIXED? YOU MAY CALL ME AT CAUSE YOU HAVE NO NUMBER LISTED TO GET IN TOUCH WITH YOU AND THEY TELL YOU TO LOOK ON LINE IT GIVES NO INFORMATION CALL ME PLEASE.708-856-0545 OR 312-351-5339

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset


The clutch is loose on my Health Master. I can't use it. I need some help please.

Apr 30, 2013 | Montel Williams Living Well Healthmaster...

1 Answer

I have a Waring Pro Speciality Blender. After only a few times in use, the jar began leaking and I noticed glass shards around the outer rim of the jar. The blades are fixed on this model. I wrote to the...


If you don't see a physical crack or stress line on the jar, the issue could be either the gasket or blade assembly - Waring doesn't list any parts for sale for this model, but you may be able to call them and get these parts. There are not very many reviews on this particular Waring, so I am working with very limited information (and this is just my opinion), but the few that I have seen suggest that this might be the worst blender Waring ever made (in general, though, their blenders are usually top-notch).

Consumer Guide generally rates it high, but issues this:
"Cons: Strong churning motion requires you to hold the lid in place to prevent leakage through the top and limits the ingredients capacity, especially for hot mixtures"

The sites that invite the most user input into the rating generally give it a 2-star rating.

Waring seems to have escaped somewhat from their usual blender shape - and I have even heard that the shaft is made out of rubber, which is frightening.

Mar 31, 2009 | Waring RB75 Specialty Blender Stainless...

1 Answer

The gear on bottom of container that ingages motor leaks grease into contents of container.


The company that is responsible for the healthmast 100 is: http://www.tristarproductsinc.com/about_us/welcome.html

Feb 02, 2009 | Jack Lalanne Health Master 100 8-Speed...

3 Answers

I received a Jack La Lannes Health Master 100 Blender last Christmas and I was using it on Christmas this year and the motor started smoking.  It says it has a lifetime warrantee on the motor and I think I...


Take your motor to a small appliance repairman. It might just be a loose wire..inside that needs replaced or re connected then follow my tips below.





I have been thru the fire about this! I sent my Healthmaster in recd another and it failed also. Almost always..it is the bearing that fails in the caraffe that supports the blade. The bearings that Jack Lalanne had installed in China..were not sealed...so they would allow water to enter corrode and eventually all of your blenders contents would come out thru the bottom! Or another thing that can happen is your blade will freeze up due to corrosion....and become immovable.
Jack Lalanne healthmaster is out of business. I manged to get a refund form Tristar..Lalannes distributor..BECAUSE they authorized me sending my blender back for a new one...and then they cashed my shipping check and then threw out my blender!!!!! I also had to call for weeks till I drove Tristar insane...so they ponied up the dough
So I doubt you can receive any money.
But this is what you CAN do!
1) If your motor functions well..you can buy a new carafe for 45 dollars or so from Cooking toys ( google cooking toys and it should come up)
2) OR if your cheap like me...and your blade doesnt rotate easily due to corrosion and your caraffe isnt leaking much...put a couple drops of oil on the outter rim of the bearing ( That would be located directly on the bottom of the outside of the caraffe..it surrounds the knurled metal part that is inserted in the motor for blending.
My blade was corroded and leaking a tiny bit..I put some olive oil on the bearing and it worked great! I have ben able to use my caraffe for a month now...when I expected to have to buy a new one from "Cooking Toys" Which I will do if this one fails.
3) If you buy a new caraffe form cooking toys..my advice? OIL THE BEARING WITH A LITTLE OIL...(any kind of vegetable oil) AFTER EACH TIME YOU USE IT! I SUSPECT IT WILL LAST INDEFINITELY>>>BUT TIME WILL TELL!

Jan 06, 2009 | Jack Lalanne Health Master 100 Blender...

2 Answers

Product motor failure


I wish I could tell you a definite solution. Have you tried calling 973-575-5400 (ext 129)? I realize it isn't toll-free. According to several web sites, the manufacturer has discontinued the product, but they should definitely still be supporting the motor warranty.

Mine is eating the bearing in the bottom of the pitcher. That seems to be everyone's most frequent problem although mine hasn't actually started to leak yet. The motor is just fine. I suspect Jack Lalanne started getting complaints about the pitcher bearing and dropped his support for the product because of that.

Dec 23, 2008 | Jack Lalanne Health Master 100 Blender...

Not finding what you are looking for?
Jack Lalanne Health Master 100 Blender 8-Speed Blender Logo

1,002 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jack Lalanne Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Jack Lalanne Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...