Question about Toshiba 56H80 56" Rear Projection Television

1 Answer

Power light flashing/ no picture

Turned off tv last night 10:30 pm +/-. tried to turn on at 5:30 this am with remote nothing happened, tried power button nothing happened. I then noticed power light was flashing and tried to turn tv off with power button but light kept flashing so I then unplugged tv. When I plugged tv back in it came on but picture was very unstable, like it was tring to change size I unplugged it again but let it sit for a few minutes. When I plugged it back in it worked fine for about 30 minutes then went off and power light started flashing again. I then unplugged for about an hour and tried it again, it came on and had sound but no picture for a few minutes then went off and light started flashing again. HELP PLEASE!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Power light flashing/ no picture

I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.

Posted on Jul 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

TV Turned Itself Off - Now - No Power No Lights Flashing

power supply board is faulty need to check the power transistors and fuses u will need a tech to solve this

Jul 14, 2013 | Samsung HL-R6167W 61" HDTV

1 Answer

WD57732 purchased 12/06 and has worked fine. Turned off at 11 pm last night. No indication of trouble. Tried to turn on this morning and nothing. Did TV Reset, green light flashed for a minute like it...

Now,tv on?.Tv "LAMP" LED light indication flashes or stay on?How long the Lamp been inside this tv,been inside like 1 1/2 or 2 years and tv been on each day like 4 or 5 hours a day in used.The lamp life are over.Should replace another lamp.

Dec 10, 2010 | Mitsubishi WD-57732 Projection Television

1 Answer

Mitsubishi WD-52525 was working fine and now it will not turn on

This is just a shot - but it worked with my Sony (same problem).
Pressed remote power on button AND held Power button on TV on at the same time.

Set clicked 4 or 5 times and then came on....

Other, most have a (VERY small) reset switch on the rear - near where the power cord enters the TV... Use a flashlight and a mirror to locate it on your set....

Nov 26, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

50 Sony Projection LCD TV - picture off and on

I recently had a proview television delivered to my home from rent-a-center they said they lost the remote and brought it any way. Need I remin you this was suppose to be a replacement television from the last television we got that only lasted a week and then blew out. Now they did not explian much just said they don't have tghe remote about an hour after they left the tv went blank and we have no remote or power button. Tried looking it up on the internet the procedure to turn it on because I honestly just don't know and can't get no answer. Is there somebody out there that can explian how this television works?

Jul 04, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

The other night while watching the tv turned off by itself.

There are two usual causes for this. One is the convergence integrated circuits have failed. The second cause is slight leakage of one or more picture tubes.

Apr 15, 2009 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Panasonic PT-53TWD63, TV will not turn on, Red power light blinks

It is most deffinately a convergence chip issue. The die for no reason. They can be bought online for around $10 dollars and anyone with experience with soldering can replace them pretty easily. I have done it.

Feb 03, 2009 | Panasonic PT-53TWD63 53" Rear Projection...

1 Answer

35" RCA 35" Entertainment Series - PIP

ok is the set completlely dead. DOEs the Led on the front flash. if it does not flash this is an indication of a primary power interuption. POSSIbley main fuse. Now generally the main fuse does not blow unless there something else wrong. some other component shorted. Now if the light flashes then this is an indication that the main fuse is still good and that the processor is getting power and that it has detected a condition that requires it to shut down. ussaly a high voltage issue

Dec 11, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Hitachi 60UX58B will not turn on

I think there could have been a power surge... ask the repairman if the power supply is blown. :)

Jun 18, 2008 | Hitachi 60UX58B 60" Rear Projection...

4 Answers

Power button Flashes

the flashing light often shows malfunction ,check the wire connection of your devices something must be wrong .the surge protector you have is for overpower or low voltage too?Ask your neigbours if they have shame problems

Nov 18, 2007 | Hitachi 46F510 46" Projection HDTV

1 Answer

Power button Flashes

Bad Convergence circuit , replace 2 STK392-110 & fuse will take care the problem

Jul 18, 2007 | Hitachi 43FDX15B 43" Rear Projection...

Not finding what you are looking for?
Toshiba 56H80 56" Rear Projection Television Logo

Related Topics:

981 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66578 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides