Question about Sewing Machines

Open Question

Can i do a flatlock seam on my janome 9200d overlocker machine?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bargainbox
  • 1388 Answers

SOURCE: Help, Janome Ezy Lock 304D Overlocker!

Although the tension units on your machine are of a different configuration, always thread from the right spool first and then each one to the left.........ONLY in that sequence !

d5f0050.jpg
now take a look at this sewusa site for a better view of the actual routine through the thread guides.........as I say, the tension units are different, but the sequence is the same, just use the image from above to see which one is next........this chart, just as the one on the fold down cover of your machine need to be followed one thread at a time from R to L

If you want any more help with this, just post back here, or, drop a line through the "Contact Us" page at www.bargainbox.com.au

Posted on Mar 08, 2008

Ad
  • 47 Answers

SOURCE: user manual

visit www.ifixmachines.com to avail a downloadable manual for your sewing machine for a cheaper price

Posted on Jul 24, 2009

  • 1 Answer

SOURCE: Janome mylock 744D overlocker

Have you tried youtube for 'how to' videos? I just found this one that might help. Good luck. http://www.youtube.com/watch?v=JyrAhSQAEeY

Posted on May 09, 2010

  • 161 Answers

SOURCE: how do i thread a janome overlocker

there's a good you tube video and threading an overlocker

Posted on Sep 13, 2010

  • 161 Answers

SOURCE: How do you thread a Janome overlocker Mylock 744D

try you-tube to video a video

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Newhome 743D overlocker. What kind of needles does it use?


From what I can discern, Newhome was a Janome product. Perhaps these needles will work:

Janome Overlock Serger Needles 5 Needles per Pack

Is this similar to your machine? If so, then the needles above may work:
Janome Mylock744D Overlocker Serger

I found some Janome 743D manuals online but they all appear to be in the UK, or elsewhere.

...

Jul 30, 2015 | Sewing Machines

1 Answer

Janome 9200d overlocker


Serger thread breaks

1. Is the serger threaded correctly?

2. Is the needles inserted correctly?

3. Is one of the needles bent or damaged?

4. Is the tension adjusted too tightly?

5. Is the tension adjusted to accommodate thickness of thread being used?

6. Are you using inferior quality thread?

7. Is the thread feeding of the cone/spool freely?

8. Is the needle size correct for the type of fabric being used?

9. Are the needles being used the correct one for the serger?

Aug 18, 2013 | Sewing Machines

1 Answer

Instructions for janome 9200D overloker


try youtube for a video
or
contact a janome dealer and ask them about a manual
or
go to the site of
a1sewingmachines.com and call them about a manual

Mar 25, 2013 | Sewing Machines

1 Answer

My janome 9200D overlocker has stopped sewing.


it's possible that the machine has gone out of time & needs to be serviced

May 29, 2012 | Sewing Machines

1 Answer

I find my janome overlock machine is very slow ,i would like to know how to increase its speed


There is no speed seperate control on overlockers other than the foot control but most sew at 1500 stitches per minute, very fast compared to sewing machines.

What is your stitch length set to as this could be the problem. For normal four thread stretch seam you would want the length set to beween 2 and 3 so double check this - the length knob is usually a knob on the right side near the flywheel.

Hopefully, the above solves the problem for you but if not, please message again.

Aug 28, 2011 | Janome 1600P-DB Mechanical Sewing Machine

1 Answer

I need a needle screw for a 9200D overlocker. Where can I find this part?


I would call Janome at 1-800-631-0183 and order directly from them so that you get the correct needle screw.

Oct 06, 2010 | Janome Sewing Machines

2 Answers

How do i thread a janome overlocker


there's a good you tube video and threading an overlocker

Jun 01, 2010 | Janome MyLock 634D Mechanical Sewing...

2 Answers

I've just got janome 634d serger, how can i make the bottom of a T-shirt ? Thank you so much


If you want the bottom of the T to look like RTW with the double row of stitching, you cannot do this on a serger.

You can achieve the effect by using a twin needle, two spools of thread, bobbin and a straight stitch.

Make sure the double/twin needle will pass through the presser foot and opening in the needle plate below the presser foot.

Practice on a double layer of a scrap of the T shirt material as the tension may need to be slightly looser than the normal setting.

Apr 05, 2010 | Janome MyLock 634D Mechanical Sewing...

1 Answer

Factory settings for stitch length and width dials


I hope you have not left this machine for a year! (If you haven't used it, feel free to send it to me!) Since the tensions on this machine are automatically set with the automatic thread delivery system, check to see if you have stitch dial set for an overlock or a flatlock stitch (which is what you're getting now).

May 07, 2009 | Baby Lock Imagine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...