Question about Gaggia Titanium Espresso Machine

Open Question

Stuck in Rinsing Cycle

Hi Last night i pressed the Rinsing cycle button on my machine by mistake but thought that since i was selling it, it might be a good idea to give it a good rinse thru. I let it go on for about an hour and then it was making a noise and hardly any water was coming out even though the tank was still half full. i turned the machine off and turned it back on again and even though the noise had gone it was still stuck in rinsing cycle. i left it a couple more hours and by the time i switched it off for the night it was only dripping water (tank still half full). I turned it on this morning, display still says rinsing cycle but nothing is coming out of the nozzle at all, i have opened steam knob and some came out of there but not alot and now that has stopped. What should i do? I have filled the tank back up to the MAX but nothing is coming through. I did try and take the dispenser out but couldnt and then reading on here that you are not able to anyway. All the other people on here are saying that the water won't stop but my machine has only rinsed half a tank at most. Help would be much appreciated.

Posted by on

  • 3 more comments 
  • Jackie Berry Jan 16, 2013

    After being on all day the machine has not done a thing, no water rinsing thru and it still says rinsing cycle. The cup hot place has heated up nicely but no other noise or movement all day? is this right?

  • Jackie Berry Jan 17, 2013

    3rd day now, display still says rinsing cycle but not doing anything. No water going thru the machine no noise, the cup warmer is warm and that is all. Do you think that on the first day when it was only dripping water thru and making a noise i shouldnt of turned it off? Maybe motor burnt out or something can anyone help? Please

  • Jackie Berry Jan 18, 2013

    4th day same as day 3, left it on over night and nothing.

  • Jackie Berry Jan 20, 2013

    I am guessing my machine has given up the ghost now. Still in rinse cycle. no water has come thru since the first day which was only half a tank before it started making a noise.

  • f_m_m
    f_m_m Feb 21, 2013

    I have the exact same problem.....have you found a solution yet??



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Rinsing Cycle stays on

Me too - machine unusable

Posted on Dec 21, 2006


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the Aqua Preserve button for? It does nothing when pressed during a wash cycle.

Hi it reduces waste of water by reusing last rinsed out water ...won't function when u select rinsing twice ..cheers

Jul 15, 2017 | Samsung Washing Machines

9 Answers

Reads "machine is rinsing open knob"

the internal motor is not running .so its not making noises as usual.
servicing required

Sep 18, 2008 | Starbucks Saeco Italia Digital Barista...

1 Answer

Washing machine will not start wash - just beeps - key on display

Press and hold the Rinse Plus button and wait for the washer to start emitting a tone.

Whilst you are pressing and holding the Rinse Plus button, the tone increases in volume from low to high and then it briefly goes silent, before it starts over agian.

If you release the Rinse Plus button immediately the tone goes silent, then this will turn off the beeping.

If you don't release the Rinse Plus button in time, just continue to press and hold the button and the tone will cycle around again from low to high to silent.

Hope that helps.

Dec 07, 2008 | Audiovox Bosch 718 World Cellular Phone

1 Answer

Gaggia Titanium stuck on RINSING CYCLE

Let it rinse it may run for some time.
you will not be able to remove the brew unit as it is engaged to be rinsed.

Nov 17, 2008 | Gaggia Titanium Espresso Machine

1 Answer

Rinsing...Warming UP... message on Saeco Magic Comfort plus

HI, I am sure you have solved your problem, however:
If you Descale the machine and let it Rinse to complettion of the
cycle; it resets the machine and it will start Rinising after warmup.

Otherwise press the Menu button and go to Energy Saving
then press the Esc buttton. This allows the machine to start
without Rinsing. Also you may turn Rinsing to Off in the Menu.

Nov 04, 2008 | Saeco Magic Comfort Plus Espresso Machine

1 Answer

Rinsing cycle won't START

After all, I turned machine off with power switch, waited 30 seconds and turned it back on. It displayed "RINSING CYCLE" message, but this time went through regular rinsing cycle, then rinsed thoroughly (I counted several cups of water) and RETURNED TO NORMAL.

Halleluiah! Now I can get my morning coffee again!

Aug 30, 2008 | Gaggia Titanium Espresso Machine

Not finding what you are looking for?

Open Questions:

See all Gaggia Titanium Espresso Machine Questions

Gaggia Titanium Espresso Machine Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gaggia Coffee Makers & Espresso Machines Experts


Level 3 Expert

78267 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a Gaggia Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides