Question about Behringer Bx4500h Ultrabass 450w Bass Amplifier

1 Answer

Buy input jack active model BX 4210A - Behringer Bx4500h Ultrabass 450w Bass Amplifier

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Contact Behringer to get part number FIRST, then go to this website to see if they have it available.

It should be a standard 1/4" mono jack, so you can always go somewhere like Radio Shaft or and get one. You certainly don't 'HAVE' to get a certified Behringer part for this. Good luck! :)

Posted on Jan 16, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Input jack

any input jack should work!

May 15, 2013 | Ibanez Tone Blaster TBX30R Guitar...

1 Answer

I need to replace my Input - jack, in my Nashville - 112 Amp !!!

Replacing jacks is not that difficult, even with one that is made different from the original. Just make sure you have the same length as the original and the same number of contacts. You can salvage one from soemthing else, like an old tape deck buy one off ebay or buy one from a supplier like Mouser or Digikey. or

Use an ohm meter as you go to make sure you get the input connected to the right tab of the new one.

Jan 29, 2012 | Music

1 Answer

Yamaha CP 300 broken headphone jack

Some keyboards use the amp output sockets for headphone use.
You might need some adapters for your headphones.
If it fell in, you would see an empty hole. This would be unlikely because it is held on by two screws. If all fails, buy an amp with a headphone jack input. Plug the keyboard into the amp and use the amps jack.

Dec 15, 2011 | Yamaha CP300 Stage Digital Piano...

2 Answers

Input jack fell inside

Yes, the jack MAY actually be broken. It will need to be serviced. Run cables through the handle to avoid plugs from being yanked sideways and breaking the jacks.

Aug 23, 2011 | Roland Cube-20x (20w 8" Modeling Guitar...

1 Answer

The input jack on the back of my behringer cabinet and the active input jack in the front of head have both cracked and separated. The Quarter inch cords for each respective input jack do not stay in. What...

The jacks have to be replaced. If you are not adept at repair, best to take it to a shop for the repair. Do NOT use the unit till repaired. If the jack shorts you may damage your amplifier.

Jul 31, 2011 | Behringer Ultrabass Bb410 1200w 4x10 Bass...

1 Answer

Need replacment inputs for boss digital delay

the jacks are not diffiult to find nor to install, but don't buy cheap radio shack jacks, go to a good music store and buy jacks ( the price may be 3 to 5 dollars each). take the unit apart and take not of where the wires go, wirte it down/draw a diagram, note colors of wire and where they go. cut the wires loose and take the old jacks out, then solder in the wires where they belong, and you're good to go.

Mar 20, 2011 | BOSS AUDIO SYSTEMS Boss Dd-3 Digital Delay...

1 Answer

I have a Fender Deluxe Active Jazz Bass thats makes this really really loud buzzing earthy sound. It seems to happen spontaneously, in fits and starts, but particularly if the cable input on the bass is...

This sounds like either a bad guitar cable or a bad jack in the guitar. Possibly your friend is not as qualified to find these intermittent problems as needed? These jacks are really junky and often have riveting of the barrel come undone... especially if the retaining nut is overtightened. The LONG barrel like jacks are notorious for failing. You have all the information you need to solve this problem. First try a different guitar cable... (often they are broken or intermittent at the end where they flex). If that doesn't fix it, replace the jack in the guitar. Also verify that the conductive coating paint within the guitar is grounded. Sometimes the contact to it is destroyed when the volume control shafts or jacks become loose and they depend upon the shaft barrel to ground the paint.

Jan 30, 2011 | Fender Deluxe Active Jazz Bass Electric...

4 Answers

How do i plug my eletric guitar into an amp

Connect a 1/4" instrument cable from the guitar's 1/4" jack to the amp's 1/4" input.

Oct 02, 2009 | Dean Guitars Dean Ml79 Electric Guitar

1 Answer

Line 6 Spider 2x12 100w combo - Input jack issue

Its a 1/4" mono Panel-Mount Audio Jack
and can be bought at
Radio Shack, Best Buy, Any Music Store
Click Here

Average price about $3.00

Mar 10, 2009 | Music

Not finding what you are looking for?
Behringer Bx4500h Ultrabass 450w Bass Amplifier Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Ben Armstrong

Level 2 Expert

357 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides