What's the keys for f16 on mc9090 - Symbol MC 9090 (sym-mc9090gk0hbega2r) Wireless Portable Terminal

See this article for fixes of a malfunctioning keypad
https://www.bctp.com/motorolasymbol-mc9090-keypad-not-working

F16 is a door fault, could be the door is not tightly closed before pressing start, the lock is faulty so the machine is not registering that it is closed or the wiring connection to the door lock is loose.

hi,
Sound like you need to look at your Keyboard mapping files, easiest way to fix this is to use Motorola System Configuration Manager - Downloadable from the Motorola website.
If the unit need to be restored to factory defaults, than a fast way is to run the Clean boot files from the SD Card also downloadable via the Motorola site - search for 'MC9090 Clean boot'

http://www.experts-exchange.com/Hardware/Handhelds_-_PDAs/Q_27803094.html

The Motorola MC9090 can have different keypads attached. If you do change the keypad for any reason for example go from a 53 key to 43 key layout the terminals must be cold booted.


To cold boot an MC9090 running Windows Mobile 5. Partially remove the battery, hold down the On/Off button, the trigger and reinsert the battery. When the orange light on the keyboard flashes release the on/off button and the trigger.

If the on/off button or trigger is held down longer than required this occasionally causes the terminal to get caught in a warm boot cycle

If the device is still not giving the correct key output it may have a faulty keypad.

If you need any more help then please do not hesitate to contact us:-

[email protected] or TEL +44(0)1202 620955

http://www.biastechnology.com/

Sure, we can upgrade any and all MC9090 products from standard memory of 64/128MB to 128/128MB. Please contact us via email or phone.
[email protected]
main 847-847-7835
cell 847-815-2230

second function key only - you can programme the key

my problem is in the configuration of symbol MC9090 in comunication with sap when send function Key ( F5) .

Question .

What the value that the SAP waiting this process?

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=7221506apdf&sliceId=&dialogID=166922927&stateId=1%200%20166920425

will show you pictures of both keypads, starting at page 75

let me know if you need me to e-mail this to you

[email protected]