Remote code for sentry 2.1 surround sound system

For programming instructions and remote codes check the following link.
www.electro-medical.blogspot.com

Replacment remote should work out the box. You may be best using a universal remote

You need to program the TV remote to work the surround sound.  You gotta select a button that says AV or Aux on the remote.  Then you gotta input some #s so the TV remote can send the proper infrared beam to the surround receiver.  The codes will be in the users manual to operate different brands of electronics.

code for dish remote to control DYNEX LTDVD20

Many surround sound systems don't work with universal remotes. They require factory remotes. I could not find any codes either.
Contact the manufacture of the surround sound receiver, go onto there website and use the contact link. Write them asking for a new remote and they will let you know how much a replacment cost.

If there are no codes in the manual then you may have two options left for you. You may order a 20 or 21 remote from Dish after verifying it will work with your system with customer service or you may get an ALL IN ONE REMOTE. Thanks for using Fix Ya and let me know if you need further assistance.

THE SURROUND SOUND REMOTE THAT CAME WITH MINE IS AD-100MTRS . for the surround sound system for the ad-1100s dvd palyer.. my surround sound no longer works. i do havethis remote still.. where are you located.
e-mail me back at:
[email protected]
use suject-remote for surround sound system.

You don't-:o)
If you lose your remote,you might consider getting a entry level of harmony remote to get the code.