Question about Philips Magnavox Learning Universal Remote

Open Question

Need instructions to program Magnavox LP20049-005 VCR Remote

I bought a Magnavox VR 9035AT01 at a flea market complete with it's remote but no instruction book. The tag indicates 1991 manufacture. VCR & Remote both work fine. The remote does not have search or function buttons but does have controls for a TV. I need instructions for programming the remote to control a TV.

Posted by on

4 Suggested Answers

SOURCE: Philips Magnavox MRU2600 Remote Control with RCA TV (cable)

0704,0002,0406,0007,0011,0611,0811,0312,0514,0720,0102, 0502,0601
08 17,0917,0835,0901,0103,0803,0211,0912,0114,0519,0320,0420
Estos son todos buena suerte.,

Posted on May 19, 2008

SOURCE: Need the instructions and Code to Program universal remote control PHILIPS (Magnavox) and Magnavox TV.

how to get capation off my philips magnavox tv with remote can not make remote to go up or down . what buttons do i use help

Posted on Jun 13, 2008

jyackle5
  • 8197 Answers

SOURCE: progam philips universal remote control to a magnavox tv

http://www.remotecodelist.com/remotes/philips/philips_pmdvd6.html

Posted on Jan 11, 2009

  • 325 Answers

SOURCE: have universal remote need instructions for

http://www.universal-remote.net/philipsmagnavox.html

There you go.

Cheers Little Dish Fitter.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Remote Controls

1 Answer

I can't program my Magnavox vcr/dvd player with


Hi. All you need to do to get your DVD/VCR to work on your Harmony remote is add it to your account. To add a device, log in to the software and click "Add Device." You will be asked to enter the DVD's manufacturer and model number, then click next. Once the device is added, connect your remote to the computer and click "Update Remote." Voila :)
Hope this helps.

Jul 15, 2011 | Logitech Harmony One Advanced Universal...

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

I have a Magnavox DVD/VCR combo that I have lost the remote to. I have bought universal remote after universal remote trying to get one that will work the DVD player or at least will setup the date and...


Universal remote does not work with Magnavox combo of dvd vcr, because no dubbing button. But magnavox has many remotes that will NB884, NB559, NB677.NB627 which also works on Sharp dvd vcr combo.

Nov 05, 2010 | Philips Magnavox Learning Universal Remote

1 Answer

Need a code for a VCR/DVD player for my universal remote


Magnavox VCR. The Phillips universal remote lists the following codes:0330, 0430, 0534, 0324, 0224, 0124, 0247, 0230, 0125, 0093, 0598, 0830. Doesn't seem they have much control of which code gets used on which model. Start in the middle and work both ways to the ends. Make sure to post back which one you find that works.

Jan 15, 2009 | Philips Magnavox Learning Universal Remote

1 Answer

Phillips magnavox tv/vcr combo need codes to program remote


most universal remote controls will not operate the combo type units. Contact www.remotes.com for a repoacement remote.

Nov 24, 2008 | RCA Universal Remote Control

1 Answer

PROGRAMING MY MAGNAVOX UNIVERSAL REMOTE CONTROL


http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Jun 18, 2008 | Philips Magnavox Learning Universal Remote

2 Answers

Samsung dvd-vr 357 remote code for comcast


The HD cable remote --> Code 21075

May 16, 2008 | Remote Controls

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1138 Answers

gbob59

Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...