Question about Taylor & Digital Scale Lithium Scale

1 Answer

I replaced the batteries in my 7542 scale and it keeps showing err or Lo. What can I do?

Posted by on

  • Our 75olds Jan 31, 2009

    Scale is very inaccurate. After each use - Err0 shows up. Can anyone help?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

Have you replaced the batteries with duracell or energizers? I ask this because sometimes when it comes to this type scales using a lower name brand type of battery isnt strong enough for it or there just may be a malfunction in that product. Let me know if this helps and good luck!

Posted on Jan 26, 2009

  • linn brown Jan 26, 2009

    have you replaced the batteries with duracell or energizers? I ask this because sometimes when it comes to this type scales using a lower name brand type of battery isnt strong enough for it or there just may be a malfunction in that product. Let me know if this helps and good luck!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model ww66


In the event that the scale battery needs to be replaced, (display shows "Lo"),
open the battery cover on the bottom of the scale and replace the old battery with
a new 3V lithium battery.

Jun 04, 2014 | Conair WW60 Weightwatchers Scale

1 Answer

I keep getting Err after replacing battery


my scale keeps reading err when I step on it

Jun 01, 2014 | Homedics Digital Scale

1 Answer

My scale showed Lo, no reading, then I replaced battery, now shows nothing, dead. What do I do next?


The Instruction Book for your scale can be found here:

http://www.taylorusa.com/media/IBs/7506_ib.pdf

Sounds like no power. Check for correct battery replacement; may need to verify that your replacement batteyr is still good.

Battery Replacement

1. Use 3 volt CR2032 lithium battery (as installed).

2. Open the battery compartment on the bottom of the scale.

3. Remove the old battery from the compartment.

4. Place the new battery with the "+" sign up into the battery compartment.

5. Replace the battery compartment cover.

Apr 23, 2011 | Taylor 7506 Glass Lithium Digital Bathroom...

1 Answer

Scale keeps showing lo no weight


Try taking the battery out and putting it back in, also there should be a small reset button. You will need a toothpick to push the reset button. Allow time for the scale to reset before stepping on it.

Apr 19, 2011 | Homedics Digital Scale

1 Answer

The taylor lithium electronic scale says 00 and then ERR. there is no ERR2. should i change the batteries? it never said lo.


If you get an "Err" or "Error" message, you will need to step off of the scale, wait a few seconds and then step back onto the scale.

Aug 10, 2010 | Taylor & Digital Scale Lithium Scale

2 Answers

MY bfm588dq-81 scale is malfunctioning. The


Throw it away. The product sucks. I know, I'm throwing one away right now and I"ll NEVER purchase one again.

Aug 17, 2009 | Health-O-Meter Health o Meter BFM588DQ-81...

1 Answer

Scales showing Lo after battery has been replaced


Anytime you have trouble with a Taylor scale - they have a lifetime replacement warranty. You need to call their 800 number and pay for 1 way shipping and they will send you a new one.

Jun 04, 2009 | Taylor & Digital Scale Lithium Scale

2 Answers

We have a Taylor 7542 Bathroom Scale. I need to


I called Taylor; the Model 7542 take a 3v CR2032 battery available at Walgreen's, CVS, WalMart, etc.

Feb 23, 2009 | Taylor & Digital Scale Lithium Scale

4 Answers

Err 1 message on Taylor Lithium Elec Scale model 7346


This is a reply I received from Taylor customer support. I have followed this procedure enough times to wear out the original battery and still get the Err 1 message. You may have better luck.

Thank you for your e-mail. The reboot below may clear the error from
your scale. You may need to do this several times to completely reboot
the system. Please let us know if you have any questions or continue to
display the Error.


1. Remove the battery from the scale
2. Set the scale on the floor without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery)
4. Carefully replace the battery without turning the scale on.
5. Using only one foot, tap the scale or apply just enough pressure to
turn on the display. (It should show dashes or zero's) IMMEDIATELY
REMOVE YOUR FOOT.
6. Let the scale turn off
7. Step on the scale for a weight reading


Regards,


Linda DLT
Consumer Relations
Taylor Precision Products
& Salter Housewares
2220 Entrada del Sol, Suite A
Las Cruces, NM 88001
Toll free - 800-289-0944
866-843-3905
Direct - 575-526-0944 ext 3172

Feb 11, 2009 | Taylor & Digital Scale Lithium Scale

2 Answers

Taylor Scale 7532s - not working


This link allows you to trouble shoot directly with the company....I hope this helps.

http://www.taylorusa.com/advantage/root/contact.html

Dec 19, 2008 | Taylor 7532 Ultra Thin Glass Digital Scale

Not finding what you are looking for?
Taylor & Digital Scale Lithium Scale  Logo

Related Topics:

1,085 people viewed this question

Ask a Question

Usually answered in minutes!

Top Taylor Scales & Body Fat Analyzers Experts

Ankit Chandel
Ankit Chandel

Level 2 Expert

127 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Are you a Taylor Scale and Body Fat Analyzer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...