An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: 7210xi will not allign --get error message.
Take the toner out and turn the printer off and reinstall the toner. Turn it back on and it should align itself. If that doesn't work, if it's a single color take all the cartridges out and then you can slid the toner holder off of the belt. There is a circuit board on the back just like the toners. Don't touch that. Put it all back together and see if that fixes it. Let me know if you have any other questions and if this was helpful. Good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. remove the cartridges on the carrier then wipe or clean the cartridges with wet cloth. also clean the gold connectors on the cartridges, and on the carrier also. 2. return the cartridges on the printer. 3. Turn On your printer and then OFF it by pulling the cord from the outlet. 4. Turn it On and do align cartridges.
To align the color cartridge, simply try taking the cartridge out, and
putting it back ini. Most often on Lexmark printers, this will bring up
a message asking if your cartridges are new or old and of what number
they are. after this menu you will likely be forwarded to a printing
i have an mp170 all in one and when you fill the cartriges they dont show up as full cannon put a chip in the cartridge to con people into buying new ones try siting the cartridges in warm water for a few hours then blot the cartridge with tisue paper if it dont blot out the ink the cartride is finnished and you need a new one .To align the cartridge you flick through the menu on the printer not pc screen look for alignment page print this off then you have to pick the dark boxes on the sheet shade the bit next to it and put on your scan bed and click ok it should scan the sheet and reset the alignment
replace the colour cartridge aLSO AS IT NEEDS some specific colour to start this allignment and to complete but the colour is not getting printed so this error.
remove the cartridges from the printer.unplug the printer for some time.then again ON it and insert the cartridges and try .
sometimes it helps.