Question about Mtd 22" Yard Machine Push Mower

Open Question

Mtd snowblower 4.5 21''

Won't start back fireing. What to do?

Posted by on

4 Suggested Answers

  • 110 Answers

SOURCE: tec 3.5 horse - 2 cycle - pull start - mtd

give it a shot of starting fluid, if it fires, it has a fuel problem, if it does not fire then you have a broken flywheel key.You will have spark with a broken or partially broken flywheel key, but your timing will be off and it will not run. good luck

Posted on Nov 17, 2009

BuzzFlewhart
  • 655 Answers

SOURCE: MTD Snowblower starts good but runs very rough

Carb adjustment. There is usually a HIGH and LOW fuel mixture adjustment on the carb. Sounds like the LOW needs to be adjusted. Do a search on the Internet for a service manual for your particular model/make. Simple job IF you have the manual there for guidance.
Good Luck

Posted on Jan 26, 2010

  • 1 Answer

SOURCE: mtd snowblower yardmachine 3 hp/21"

if you are standing at the handles of the snow blower , kneel down there should be a sticker on the drive cover between the wheels , hope that helps

Posted on Jan 13, 2011

  • 277 Answers

SOURCE: I have a mtd 26" 8hp snowblower that need aufer

if the bolt broke off then you need to get old part of it out before putting in a new bolt.

Posted on Feb 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Infiniti qx56 started it to warm up and walked in the house and it died and won't start back. Cranks but not getting fire


well pcm control ignition timing and firing.pcm fires all the ignition coils, best have vechicle code scan for pcm fault or CKP OR CAM SENSOR FAULT.

Sep 04, 2012 | Cars & Trucks

1 Answer

Honda em5000sx generator won't start


Hi,
I have a EM5000SX. My problem is my generator will not start unless I turn the fuel selector to off. Then crank it until it does start, turn the fuel back on. Run's normal . I run this generator for my cabin every weekend.

Aug 25, 2012 | Honda Electrical Supplies

1 Answer

My 1987 jeep cherokee pioneer will start but then you drive to the store come back out and it will not start until it sets for 5 or 6 hours..


You may have a faulty ignition coil. Check to see if system is firing when it won't start. If you have fire it is probably fuel pump.

Aug 08, 2011 | 1987 Jeep Cherokee

2 Answers

2000 nissan maxima won't fire when trying to start. it turns over but won't fire. it started once and ran but won't start again


sounds like it might be flooded. Try and remove the fuel pump fuse from the fuse block that is just in front of your left knee. While it is out crank the car and see if it wants to start and hold down the gas pedal all the way and then relase it and back and forth and once you get it to run have the fuse ready in your hand and in front of the spot to install it. and then keep the rpm's up with the gas pedal until the smoke clears out behind the car.

Jul 02, 2011 | 2000 Nissan Maxima

1 Answer

Won`t start


My name is Ron ,sounds like you need to put a new pick up coil in distributor,and a module also,so you won`t have to go back in the distributor,If I can help roniecon@gmail.com

Jul 19, 2009 | 1991 Chevrolet K1500

Not finding what you are looking for?
Mtd 22" Yard Machine Push Mower Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mtd Garden Experts

Dwain Pippen

Level 3 Expert

376 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Are you a Mtd Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...