incorrect wiring on a heater element for a hobart am14
Comments:
Jan 26, 2009
- it is a single phase.
it was wired so that only the middle loop on the heater element was connected to both wires.
the other two loops only had one wire going to each of them.
we do not have three phase going into our building.
so is only one loop the methoid they used to keep it one phase or did the rebuilder wire it wrong??
I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible...
(More)
I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.
Hobart am 15 select The dishwasher is new and it will wash the dishes but it will not go through the...
(More)
Hobart am 15 select The dishwasher is new and it will wash the dishes but it will not go through the rinse cycle.Please advise?