Question about D-Link DWL-G700AP 802.11g/b Wireless Access Point

1 Answer

Unable to update firmware

None of the dowloaded Versios for my DWL-G700AP work.
Current Firmware Version is 2.13
Tried 2.13B6, 2.20, 2.30b2
Nothing, always the same when clicking Apply:
"File is Worng !!"

Any Ideas?

Posted by on

  • 1 more comment 
  • Anonymous Jan 27, 2009

    1) Yes, i am in Germany and so use the german / european versions.
    The newest versions are on ftp.dlink.co.uk
    2) of course did i unzip the file before trying to upload
    3) of course i was connected by wire

    Sorry, but i am no dummy regarding this, so please no solutions for dummies ;)

  • Anonymous Mar 10, 2009

    same problem, no solution

  • Anonymous Mar 27, 2009

    Same problem with v2.10

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Your router latest Firmware I can see on D-link website is 1.02
If you are referring to German web site page showing a dwl-g700ap_fw_revB_v213b06.zip file be sure to follow the instruction to UNZIP the web_dwlg700ap_v200_r11_0408.bin file:
DWL-G700ap Firmware Update

- Browser starten
- Konfiguration des DWL-700ap aufrufen (Standard IP 192.168.0.50)
- oben auf Tools
- links auf Firmware
- auf den Knopf Durchsuchen klicken
- die Firmware Datei (web_dwlg700ap_v200_r11_0408.bin) auswählen
- auf Apply klicken

Wenn die Firmware installiert und der DWL-700ap dann neu gestartet ist klicken Sie oben auf Tools/System/Restore to Factory Default.

Danach ist die Firmware übernommen.

If you did not unzip the bin file router cannot run it as firmware update
More over be sure to run the update via LAN cable connection (no WLAN)

Posted on Jan 26, 2009

  • Pat Batta
    Pat Batta Mar 24, 2009

    no solution for dummies here normally they do not reset to factory default, before update.Try

  • ToodToo Sep 23, 2010

    Did you try upgrade through Internet Explorer? It's works for me.
    Through Firefox always said "File is wrong".

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It does not turn or or charge. Connected to laptop but got same results. Tried to install latest software but it would not the unit (forerunner 305). Message was that there was no unit connected...


Here's a few options: Soft Rest

- Hold down MODE + RESET for few seconds
- Press the Power button to turn on the device

------------------------

Hard Reset
(This will erase all of your data inside the device)

- Hold down MODE + RESET + POWER for few seconds
- Press the Power button to turn on the device

------------------------

Firmware Downgrade/Upgrade (2.9 > 2.8 > 2.9)
(This will erase all your data inside the device)

Software Downgrade/Upgrade

- Connect your Garmin Forerunner 305 to the computer
- Press the UP arrow button and hold while doing all the other steps below
- Press MODE + RESET for a moment (the computer will recognize the device)
- Dowload the Firmware from Garmin's website.
- Downgrade Firmware from 2.90 to 2.80. (You are still holding on that UP arrow button!)
- When the update is finished the Forerunner 305 should power on running the Firmware 2.80.
- Let go of the UP arrow button, disconnect the device from USB, connect it again and the computer should recognize it normally
- Update the Firmware to the current version.

Nov 04, 2012 | Garmin Forerunner 305 GPS Receiver

1 Answer

I am connected to my new dlink DHP-W306AV via ethernet cable on MacOSX Lion and I have internet access, but I cannot acces the router at 192.168.0.50 ... It just says "Server is not responding" ...


You should reset the unit back to factory and also install the latest firmware , if it not already updated previously. This unit was discontinued by the manufacturer back in 2004.

Here is the manufacturer's link to your unit

http://www.dlink.com/products/default.aspx?pid=DWL-2000AP&tab=3

Be sure you select the correct version for the manual and firmware

Aug 13, 2011 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

Can I use the dwl-g700ap as a repeater?


Hello,
Yes, the DWL-G700AP can be setup as an AP or a repeater as long as your current wifi router is also 802.11g/b.
You can find instructions here: http://www.docstoc.com/docs/2583739/How-do-I-configure-repeater-mode-on-DWL-G700AP
Regards, Chris

May 18, 2011 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

Firmware


Hello jagancs1,

The Belkin Router's software (firmware) can be occasionally updated. To check for new updates, go to the Belkin Router Setup page http://192.168.2.1/ . The following choices will appear to update firmware and save current settings:

•Select Firmware Update (Near the bottom of the left-hand panel)
From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this Router.
•Firmware update Options:
Firmware Version > #.##.##
Check for New Firmware Version > [Check Firmware]
Update Firmware > [Enter file name/Browse]
[Update]

•NOTE: Please backup your current settings before updating to a new version of firmware. Click Here -> http://192.168.2.1/system_c.stm to go to the Save/Backup current settings page.
•Save/Backup Settings
You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update.
*Saved File name is user.conf*

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Jul 04, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

Why haven't you found solutions for the posts above???


Hello joe_east,

The Belkin Router's software (firmware) can be occasionally updated. To check for new updates, go to the Belkin Router Setup page http://192.168.2.1/ . The following choices will appear to update firmware and save current settings:

•Select Firmware Update (Near the bottom of the left-hand panel)
From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this Router.
•Firmware update Options:
Firmware Version > #.##.##
Check for New Firmware Version > [Check Firmware]
Update Firmware > [Enter file name/Browse]
[Update]

•NOTE: Please backup your current settings before updating to a new version of firmware. Click Here -> http://192.168.2.1/system_c.stm to go to the Save/Backup current settings page.
•Save/Backup Settings
You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update.
*Saved File name is user.conf*

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Jul 04, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

Unable to update firmware on sansa clip+


Hello,

Next link refers to the Sansa Firmware Updater, you tried to use for
updating:
http://kb.sandisk.com/app/answers/detail/a_id/300/kw/update/r_id/101834
The updater download link:
http://mp3support.sandisk.com/sansa/Application/SansaUpdaterInstall.exe
NOTE: Administrative access is needed on your PC to run the Sansa Firmware Updater

NOT supported:
MAC & Linux
When running MAC or Linux instead of a Windows based computer, the updater will not work.


Checking the answers page for information support, see the page:
http://kb.sandisk.com/app/answers/detail/a_id/4303/kw/update/p/555%2C1727/r_id/101834
Sandisk comes with next results:

For the Sansa Clip there are updates available:
- Clip Firmware Update (latest version 01.01.32 & 02.01.32)
Sandisk Forums page:
http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=15109

For the Sansa Clip+ there are no updates:
- Clip+ Firmware Update (not available yet)

Sansa Clip+ user manual:
http://mp3support.sandisk.com/downloads/um/clip+-en-um.pdf

Nov 21, 2009 | Audio Players & Recorders

1 Answer

DWL 2700 AP wrong firmware install


hi...
since you upgraded a different firmware try updating the firmware again with the correct firmware if it works fine if it doesnot then the router had gone bad,,
and for GeminiBS reset the router to the factory default since the firmware was not done in a proper manner may be it had interruptions..once the hard reset is done the computer is restored back to the default so that you can use the device..

vedhick

Feb 13, 2009 | D-Link AirPremier DWL-2700AP 802.11g/b...

1 Answer

DHCP option is disabled when LAN IP is Dynamic on DWL-G700AP


that is right the access point does not have a dhcp server. that will give an ip address to all of your computers or device connected to it wireless. If you have a modem with a dhcp server there will be no problem with the IP but if the modem does not you must have a router and now an access point.

Aug 07, 2008 | D-Link DWL-G700AP 802.11g/b Wireless...

3 Answers

Factory reset dwl g700ap


Bill,

I have here the steps on how to reset your device.

To perform a reset, please follow steps below:

Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.

Step 2 Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Jun 05, 2008 | D-Link Air Xpert DWL 7000AP (DWL-7000AP)...

2 Answers

Garmin Nuvi Firmaware Update Complete, Unable to catch satellite signal


Same here - garmin nuvi 310 - bought it last year around March, said dowloading gps and then can't get a signal/satellite?? Will phone garmin tomo

Apr 18, 2008 | GPS

Not finding what you are looking for?
D-Link DWL-G700AP 802.11g/b Wireless Access Point Logo

Related Topics:

2,669 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Mike

Level 3 Expert

4334 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...