Question about Whirlpool AWM5125/1 Front Load Washer

1 Answer

Whirlpool awm 221 washer

My Whirlpool AWM 221 doesn't heat the water during it's washing cycle? I have tried various temp settings and it's cold on all used.

Posted by on

  • Anonymous Mar 26, 2014

    What are the different symbols/settings for the 5060-600? For example 1-10 and A-D.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

You will need a replacement heating element for the appliance

Posted on Jun 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Inlet valve non operational on whirlpool awm 258 nordic


Please check on the voltage on the inlet valve , check on the controller if there is no voltage if not the inlet valve is faulty.
click this link: inlet valve

Jul 27, 2012 | Whirlpool Washing Machines

1 Answer

My whirlpool washing machine AWM 6085 is unable to **** in the water from the pipe during washing. What can I do?



Hi,

If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Mar 09, 2011 | Whirlpool Washing Machines

1 Answer

Hi. I've just been loaned a Whirlpool awm 5125/4 washing machine (while mines gone for repair), but it has on the back of the machine, a hot inlet and a cold inlet. My machine only requires a cold water...


Hi,

Your machine can be connected for cold fill only but, you will need to connect a "Y-Piece" for it to work:
belectric_29.jpg
The tail of the "Y" attaches to the cold water valve on your pipework. You then attach both hot and cold water hoses to the branches of the "Y" and connect both hot and cold water hoses to your washing machine. The wash cycles will take longer when connected this way as the machine has to heat the water internally. It will also be less energy effecient.

Please post back if you need further assistance.

Regards,
BElectric

Dec 11, 2010 | Whirlpool AWM5125/1 Front Load Washer

1 Answer

Whirlpool AWM 5080 stops during cycles


Sound like could be faulty pump however you need to make sure no
Could be pump at fault 1st you need to make sure no coin stuck in there ...




Mar 31, 2010 | Whirlpool AWM6100 Front Load Washer

1 Answer

Front loader AWM 6100 - door open light flashes and won't wash


I think it may have try and get your local engineer out to have a quick look tell your thinking of buying new and what price can he supply 4. and you like a free estimate .

Feb 11, 2010 | Whirlpool AWM6100 Front Load Washer

1 Answer

Help! im looking for a manual for a whirlpool awm 293-600 and also maybe a close up picture of the cycle dial as some of the settings have rubbed off?


I am not sure about the awm 293-600 number, but under the ghw 9150p (under your picture) I found one here..
There is a nice picture of the dial settings too.. I hope this helps you. Let me know...

Sep 10, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Soon as i set cycle and swich on door light flashes open


hi,
The cycle doesn't advance
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. 


It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Thanks for your question.

Jan 03, 2009 | Ariston Technologies AW129NA 16 Lbs Front...

1 Answer

Washing cycle starts and takes hours even for short cycle.


Try checking for good water supply.
Pull out detergent tray and check for good water supply during filling.
if poor filling-
Try checking the hoses.
Turn taps off, disconnect from machine, place hose end in sink, turn tap on and check for good water flow.
if the hose has a red indicator in the side of the hose (end which is fitted to the tap) - Red indicator is a failed hose.(for models with Water Stop hose type "B")

Oct 05, 2008 | Whirlpool AWM6120 Front Load Washer

3 Answers

Whirlpool washer problem


it sounds like you cold inlet need replaced its a easy job

Jan 10, 2008 | Whirlpool AWM6100 Front Load Washer

Not finding what you are looking for?
Whirlpool AWM5125/1 Front Load Washer Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...