Question about Dryers

1 Answer

I have a maytag lde-412 electric dryer that a customer of mine wants a new belt put on ive looked up the part and can find one but i need a diagram fo how the belt goes on .

Posted by on

  • djuliano0 Jan 24, 2009

    thanks rpbuice

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 161 Answers

The last belt I bought had a diagram printed right on the plastic bag it came in. Call your parts place and see if yours is the same.

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag lde 212 dryer, drum not turning, new belt I think it is routed correctly but seems loose, can you tighten spring tension on the idler pulley?


hi easyrb...

If your belt is new and it is loose, then you have routed your belt wrong.
Follow this link and you will see the correct way to route your belt
Please take time to rate me

http://www.expertappliance.com/dryerbeltconfiguration.html

Jul 11, 2011 | Maytag Dryers

1 Answer

L have a older maytag lde 410 the drum is hard to turn after the belt came off can you help us please


here is a descent website, Hope it helps Tim:

http://www.partselect.com/dryer+dryer-wont-tumble+repair.htm

Oct 19, 2010 | Maytag MDE8757AY Electric Dryer

1 Answer

Maytag Dryer Model #LDE 4916 ACE. Dryer won't start


Sorry, no reset button. If it ran a bit without the belt, it may have overheated and blown one of the thermal fuses. You can find schematics and diagrams at
www.appliancepartspros.com
Good luck.

Mar 15, 2010 | Dryers

2 Answers

How to put on a dryer belt?


Go to repairclinic.com and click on the "Repair Help" link at the top of the page. On the following page, look for the "Dryer Belt Diagrams" link under the "Special Features" section. Refer to Diagram E for a Maytag dryer. If you have questions, please let me know. I hope this helps you.

Sep 26, 2009 | Maytag PYE2300AY Electric Dryer

3 Answers

I need the diagram for the belt on a Maytag MD-6 Neptune Dryer. I just need to get the belt back on the tensioner.


Go to repairclinic.com and click on the "Repair Help" link. On the following page, look for the "Dryer Belt Diagrams" link under the Special Features section. Scroll down to Maytag (diagram E). I hope this helps you.

Aug 11, 2009 | Maytag Neptune MDE4000 Electric Dryer

1 Answer

Need routing diagram of dryer belt on maytag dryer D7600


Go to repairclinic.com and click on the "Repair Help" link at the top of the page. On the following page, locate the "Dryer Belt Diagrams" link under the "Special Features" section. Scroll down to Maytag. The dryer belt diagram for Maytag should be listed as diagram E. I hope this helps you.

Jan 28, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

New dryer belt is rubbing top of idler arm spring


Go to repairclinic.com and click on the "Repair Help" link at the top of the page. On the next page look for "Dryer Belt Diagrams" under the Special Features section. There is an extensive list of dryer belt diagram illustrations available that you can print out. Maytag is listed. Hope this helps you.

Nov 11, 2008 | Dryers

1 Answer

NEED TO REPLACE BELT ON MODEL lde 412 series 02 serial no. 618 889 PX


its a maytag,
LDE 412 series 02, the labelling printing machine at Maytag is notoriously crappy

Unplug dryer
Remove two screws at bottom edge of front panel, under the lip facing up so they are hard to see.
  • May be TORX secure screws(star shap with a pin in the middle), TORX secure bits ~$6 at good tool shops, or cut a slot across the head of the screw and use a flat blade, throw the torx away and replace with phillips head screws, easier for next time
.
tilt front panel up from the bottom and unhook it from the catches
undo door switch cables
place door aside
lift drum out
motor, belt, bearings, felts, are all easily accessible.
check felts and roller bearings before you put the case back on, often a seized bearing is cause of belts breaking

While you have the case off pull all the lint n **** out of vent and motor area

Aug 25, 2008 | Dryers

Not finding what you are looking for?

Open Questions:

Dryers Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...