Question about Sewing Machines

1 Answer

Machine keeps sewing after foot pedal is off

Evan after I have lifted my foot off the pedal the machine keeps sewing and stitching for about half a minute...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 65 Answers

There is something stuck in the pedal causing the electric circuit to connect, perhaps some thread or a pin.
unplug it from the machine and see if you can unloose it from under the panel.

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Juki sewing machine keeps sewing after releasing foot pedal


Your machine could be out of time. When you turn on does it stop or stitch a couple switches. Belt could be worn out as well. How old is it? Thank you very much. Please leave some feedback or more information so I may help you.

Jul 10, 2016 | Juki TL-98Q

1 Answer

After a long period of no usage, i turned to foot pedal spped to faster pace & began sewing faster. After a few minutes the sewing machine took on a life of its own & wouldn't stop stitching - even when i...


When you unstuck the pedal, did you also go inside to unstick the contacts (switch). This happens sometimes for lack of use. You may need to replace the contact, but you will see when you get in there. GOOD LUCK FRIEND.

Nov 13, 2014 | Sewing Machines

1 Answer

My Aunt gave her D'lite sewing machine. It sews correctly but will not stop sewing unless you unplug the cord. The start and stop button will start the sewing if not using the foot pedal but it will


There's a possibility that your foot pedal is sticking; if that is the case, it's probably overriding the stop button. See if you can take the cover off and clean it using alcohol, and leaving it open for a couple of hours to make sure it has dried. Visually check the wires while it's open, too, to see if you can see any fraying, and make sure the plug on the machine side is firmly seated in the machine.

Sep 14, 2014 | Sew D'Lite Sewing Machines

1 Answer

Cant get machine to embroider


there are three positions the presser foot can sit in. Up and down are the same on any machine. The 7570 has an in-between position for embroidery. Lift the presser foot and the lower it slowly while pushing gently. It should stop about half way down. The embroidery foot pushes the foot into the down position with each stitch allowing the fabric to move easily to the next stitch.

Jan 29, 2013 | PfaFF Creative 7570

1 Answer

Foot pedal not working


yes, it is possible that the foot pedal can go out,, it would be a good
idea to have the foot pedal checked at a repair shop to see for
sure

Aug 27, 2012 | PfaFF Tiptronic 2040

1 Answer

I have a Bernina Activa 220. I was gone for 10 days with the machine unplugged. When I returned to sewing, there have been occurences of the needle sewing faster with me not changing the pressure on the...


is sounds like their could be a short in the machine or the
computer main board could be going out. I suggest having the
machine check by a sewing machine technican

Aug 17, 2012 | Bernina Activa 130

1 Answer

The foot pedal makes noise, but won't turn bobbin.


only having the machine check at a sewing machine repair shop can say for sure

Mar 26, 2012 | Kenmore Sewing Machines

1 Answer

Hi I have a cee100 singer embroidery/sewing mach. in utility mode on straight stitching i have the problem of uncontinuous stitching. Sometimes when the foot lever is pressed it will sew a few inches but...


i spoke with support and they tell me that this is a threading issue. pull the thread back and forth, like flossing, under the plastic plate on top so the thread clicks into place. then procede with threading.

Oct 31, 2008 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Bernina Activa 135 sewing machine


Hi , the pedal micro switch are stuck , you may visit fixya repair service just , (enter zip area), you can find sewing machine repairman near you

Feb 22, 2008 | Bernina Activa 130

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Irene Tulloch

Level 2 Expert

449 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...