Question about Magic Chef MCSTCW16W2 TOPLOAD COMPACT WASHER

Open Question

Beeping Machine beeps several times approximately every 30 minutes when it's NOT in use. Note that there are no error codes showing on the screen when this happens. Any ideas why and how to stop/fix this?

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fixyourboard
  • 310 Answers

SOURCE: 1989 Magic Chef gas range digital display keeps beeping and says

This is a common failure in the control board. Here is an article that discusses the details.

http://www.fixyourboard.com/techzone/ovens/f1_error/f1_error.html

We repair a lot of these at www.fixyourboard.com, so you don't have to scrap out your oven.

Posted on Jun 26, 2010

oldTech2332
  • 2341 Answers

SOURCE: I'm getting a constant beeping sound and a F1

The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced

Posted on Aug 10, 2011

Testimonial: "thank you for such a quick response! On my unit it is a STOP/CLEAR button but it only stops it for a minute, so it must be the touch pad. *sigh*"

  • 794 Answers

SOURCE: Gas range beeps non stop and the panel shows F1

Hi bobctsai,

F1 error code description is a defective touch pad or clock (ERC). To resolve this error, replace touch pad or clock (ERC). Touch pad is a more common problem.

Hope it helps.

Thank you for using FixYa.

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier dishwasher HDW9WHT beeps 5 times and won't wash what is wrong with it can I fix it or should I get someone in


7 results (0.54 seconds) Search Results

    Haier HDW100WH / HDW100SS - ProductReview.com.au

    www.productreview.com.au > ... > Dishwashers > Freestanding > Haier

    Rating: 1.7 - ‎30 votes
    Haier HDW100WH / HDW100SS: 30 customer reviews on Australia's largest ... 1.7 out of 5 stars for Haier HDW100WH / HDW100SS in Freestanding Dishwashers. ... I putthis review in to do my part for what I think is a great consumer service you ... it it keeps beeping 10 times telling me doors open??and won't begin cycle.

    Haier Dishwasher Error Fault Codes - Lights Flashing ...

    removeandreplace.com/.../haier-dishwasher-error-fault-codes-lights-flash...
    Dec 21, 2015 - Haier dishwasher error codes - flashing lights - beeping ...Dishwasher keep filling water and draining at the same time ... Fix Washing Machine That Won't Drain - Washer Not Draining Water .... 2015; Samsung Galaxy Note 5 Quick Users Guide September 25, 2015; My Freezer Is Cold But The Refrigerator ...

    Dishwasher Has Beeping Sounds Blinking Lights - How To ...

    removeandreplace.com/.../dishwasher-has-beeping-sounds-blinking-light...
    Dec 21, 2015 - At times your dishwasher may need to be reset. ... Haier DishwasherError Fault Codes - Lights Flashing Beeping Sounds My Haier ... Fix WashingMachine That Won't Drain - Washer Not Draining Water .... 2015; Samsung Galaxy Note5 Quick Users Guide September 25, 2015; My Freezer Is Cold But The ...

    How to Troubleshoot & Repair a Dishwasher ' HomeTips

    www.hometips.com/repair-fix/dishwasher.html

Jan 19, 2016 | Haier Dishwashers

1 Answer

Frigidaire Gallery model GLEQ2170KSO dryer turns off within a minute.


Hello allisonarena - Try reprogramming the dryer by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and then turn on the unit. If issue persists, then the dryer may possibly be experiencing more serious issues such as; wiring failure, faulty control board, thermal limiter, or defective door switch. I would recommend connecting with an experienced appliance repair tech to assist further and to reduce the risk of unnecessary parts.

Jun 12, 2013 | Frigidaire Dryers

1 Answer

I get a F11 code with beeping noise and the oven controls won't work? what can i do?


Hi Ken Kazemi - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if it proves to be ineffective contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.

Feb 03, 2013 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Lenovo desktop 3282 beeps twice then 5 times and goes no further


Follow these steps to clear the password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery
5. Remove the real-time clock (RTC) battery
6. Wait approximately 30 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.

Aug 01, 2012 | Lenovo Computers & Internet

1 Answer

I have a E-Machine desktop that will be 3 yrs old this November, ( black Friday). It's operating system is windows X.P. When I turn on the tower the yellow lite stays solid on, and the tower emits...


ok cammy there are several ways to solve this puzzle of yours.... first off here is a link that will explain the multiple beeps from your computer as follows!

http://www.d-a-l.com/help/general-hardware-issues/12347-beep-code-list.html

and being that your computer beeps 6 times could possibly mean that

6 Beeps 8042 Gate A20 failure Bad CPU or Motherboard

Generally, six beeps means a keyboard controller error. Unplug and replug
your keyboard when computer is off. If that doesn't work, you may have a bad
controller on the motherboard .
Generally, six beeps means a keyboard controller error. Unplug and replug
your keyboard when computer is off. If that doesn't work, you may have a bad
controller on the motherboard .

Generally, six beeps means a keyboard controller error. Unplug and replug
your keyboard when computer is off. If that doesn't work, you may have a bad
controller on the motherboard .

Aug 08, 2010 | E-Machines Computers & Internet

1 Answer

My GE Profile oven is beeping every minute. I've


if its an f-7 error code its due to a stuck error code

Feb 06, 2010 | GE Profile JT955 Electric Double Oven

2 Answers

Latitude D600 beeps twice


that may be because of a bad connection with the harddrive thats easy to fix you just take the harddrive out and blow the connecting surface clean then it should behave normaly agian:)

Jan 04, 2009 | Dell Latitude D600 Notebook

1 Answer

No display lights


Run the PSA Diagnostics and Obtain the PSA Error Code

To run the PSA diagnostics and obtain the PSA error code, perform the following steps:
Shutdown the computer.

Press and hold the <Fn> key, then press and release the power button.
Release the <Fn> key when the lock lights above the keyboard begin to flash or Diagnostic boot selected is displayed in the upper right corner of the screen.

Release the <Fn> key.
The PSA diagnostics sequence begins.
After approximately 2 minutes the system produces a number of alert tones.
After the alert tones, the system produces either a series of low beeps or error codes.

Note:
PSA diagnostics will prompt for input during some tests. The resulting error message does not necessarily indicate hardware failure.
For example, input is required during the color bar test. Failure to input a response will eventually result in a timeout error: 1000-0333 Graphics test timed out waiting for keyboard response. This does not indicate a graphics failure has occurred.


Note the sequence of beeps or error codes.

Initialize LCD BIST Diagnostics



You can initialize the LCD Built-in Self Test (BIST) in two ways, depending on the revision of Pre-boot System Assessment (PSA) diagnostics:
PSA versions 3019 and greater run LCD BIST immediately after failing the color bar test, via user input of <N> or waiting for it to time out prior to generating the 3-3-3 or 3-3-4 error. PSA version 3019 became available in November 2005 on various Dell laptops. The PSA version is upgraded with the BIOS.

With older versions of PSA diagnostics prior to November 2005, LCD BIST runs after responding with a <Y> after receiving a 3-3-3 or 3-3-4 error code.
To initiate the LCD BIST on PSA versions 3019 and greater:
Boot to the PSA Diagnostics.
Watch the screen and listen for the color bar test prompt tones emitted by the PSA Diagnostics. If the screen is visible, one will see the PSA diagnostics draw a series of multi-colored bars across the screen. When completed, a prompt asking if the pattern was seen appears, accompanied by a brief series of tones.
Press <N> or wait approximately 30 seconds to fail the color bar test.
Watch for the LCD BIST color generation and listen for the beeps every 2 seconds that indicate LCD BIST is running.
LCD BIST runs for approximately 20 seconds, then stops. The 3-3-3 or 3-3-4 error code is then displayed when the LCD BIST is complete. If LCD BIST does not initialize, then the system may not have been upgraded to PSA version 3019.
To initiate LCD BIST on systems with PSA versions prior to 3019:
Boot to the PSA Diagnostics.
Watch the screen and listen for the color bar test prompt tones emitted by the PSA Diagnostics.
Press <N> or wait approximately 30 seconds to fail the color bar test.
The system emits a 3-3-3 or 3-3-4 PSA error after failing the color bar test. Wait for two iterations of the failure code and then press <Y>.
Note:
On a working LCD, the PSA diagnostics shows the following message:
Error Detected, continue testing? Yes or No or Retry.


Watch for the BIST color generation and listen for the single beeps that indicate LCD BIST is running.
Patterns of flashing color should appear on the screen. With every color change, an audible beep is heard. If the patterns of color do not appear, and the beeps are audible, an LCD failure may be the issue. If the patterns of color appear, a video card or motherboard failure may be the issue.
IF AN ERROR IS INDICATED, PLEASE CALL DELL SO YOU CAN SEND SYSTEM TO SERVICE DEPOT FOR REPAIR (WE'VE JUST TRIED TO ISOLATE ISSUE TO SEE IF ERROR IS CAUSED BY HARDWARE OR SOFTWARE, OR JUST SOME CONFIGURATIONS)

Thanks and Goood luck! =)

Jan 03, 2009 | Dell Inspiron 9100 Notebook

Not finding what you are looking for?
Magic Chef MCSTCW16W2 TOPLOAD COMPACT WASHER Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Washing Machines Experts

Robert Smith
Robert Smith

Level 2 Expert

243 Answers

Craig Hill

Level 2 Expert

81 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Magic Chef Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...