Question about Xerox Phaser Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: xerox phaser 8860
This unit has a common situation that requires parts and 2-3 hours of labor. This error points to a bad process motor 127K53240
These generally go bad with 2 camshafts 020K14800 and 008K02160
Posted on Aug 10, 2010
12 codes on that machine mean a software error.
You can try removing and reseating the RAM chips , most likely its corrupted and will require a software install. The software ( Firmware) would be found at xeox.com, Click on drivers and downloads, then type in 8860 in the search box then click to drivers and downloads again and scroll down to firmware.
Posted on Jul 13, 2010
SOURCE: display shows RAM ERROR on
would first try to inspect and possibly replace the ram. On the back
of the machine there are two thumb screws holding on a metal plate.
Remove the two screws to access the ram. You can remove the ram and try the second ram slot if it is unused. (check the video at 2:45 to see what this looks like) If after replacing the ram and trying both ram slots the
error continues you most likely need to replace the Electronics module
(MFP part# 084K36560, non-mfp part# 084K36550). Here is a video that shows you how to replace that
part. (video is of a 8500 non-mfp version so it is a little different but
still similar). Good luck, and thanks for using FixYa!
Posted on Sep 07, 2011
This fault code indicates a problem with the process control system.
Cannot successfully move the transfix mechanism to home position.
Check for obstructions around the Printhead. Look for ink blobs in gears of the tilt drive.
Clean any ink or debris which may be restricting movement of the drive train or Printhead.
Posted on Jul 03, 2012
Tips for a great answer:
Feb 17, 2015 | Xerox Phaser 8860/PP Color Laser Printer...
Jul 02, 2012 | Xerox 8860dn Phaser All-In-One Thermal...
Apr 05, 2011 | Xerox Phaser 8560DN Laser Printer
Jul 09, 2010 | Xerox Phaser 8860MFP Printer
Mar 20, 2009 | Xerox Phaser 8500/DN Printer
86 people viewed this question
Usually answered in minutes!