Question about HP iPAQ H5550 Pocket PC

2 Answers

Hp ipaq 5550

I forgot my password for my hp ipaq 5550 pocket pc then it ask me if i want to do a full reset i click yes now am stuck on that screen

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

To do a full reset, you hold the calendar and itask buttons (buttons 1 and 4) down at the same time, then insert the stylus into the little hole on the bottom and press gently. Hold all for 4 seconds. The screen should begin to fade. Now release all. If successful, you will not be able to start the machine by pressing the on button. You will have to reconnect to ac power to start it.

That is all there is to it.

Posted on Mar 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Network managers are now provisioned with highly secured and feasible solution through the revolutionary launch of Pocket VPN. The technology offers establishment of protected wireless connection to all handheld device users with their organization network. It provides active application session for your work environment via wireless device. The authenticated, encrypted tunnel for data transfer has enhanced the utilization and affordability as it goes mobile through Pocket Pc.

Posted on Jan 08, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot my password on hp ipaq pocket pc


you may visit some master reset code sites..

Jun 11, 2011 | HP iPAQ 112 Classic Pocket PC

1 Answer

Hp protecttools


hi !

if you forgot your password then that might become a problem now. you have to bring that to a service center to unlock that.

hope this will help you.

Jan 16, 2008 | HP iPAQ rx1950 Pocket PC

1 Answer

I forget my password....so how should i break it?


Hello,

the password can not be broken, but you can perform a hard reset that wipes the device clean including the password. all content is lost.

1. Press and hold the lower left and lower right buttons.

2. Press the Reset button on the bottom of the iPAQ Pocket PC
with the stylus.

3. Hold all buttons until the displayed image begins to fade
(approximately four seconds).

4. Release the program buttons and stylus.

You can verify a full reset by pressing the power button. If the
iPAQ Pocket PC has been fully reset, it will not turn on.

5. Reactivate the battery by doing one of the following:

Connecting the iPAQ Pocket PC to AC power

Pressing the Reset button with the stylus

Nov 06, 2010 | HP iPAQ H5450 Pocket PC

1 Answer

IPAQ 5550 can I override the pin number?


Simple Solution:

Perform a hard reset and then attempt to login repeatedly (10x).

You will then be prompted if you wish to reset the pin entirely.

Good luck,
-AndyPants-

Jun 15, 2009 | HP iPAQ H4150 Pocket PC

2 Answers

How do i do a FULL RESET on my ipaq 5550


Hey,

instructions are here
http://geopocket.org/AngellHallAudC/ipaq_5550.htm
Let me know if you need anything else.
Thanks,
Ekse


Mar 02, 2009 | HP iPAQ H5550 Pocket PC

1 Answer

Locked up HP Ipaq Pocket PC


find your manual and use the default password since the unit had been reset.

Aug 18, 2008 | HP iPAQ H1910 Pocket PC

1 Answer

My hp ipaq wont start


To do a full reset, you hold the calendar and itask buttons (buttons 1 and 4) down at the same time, then insert the stylus into the little hole on the bottom and press gently. Hold all for 4 seconds. The screen should begin to fade. Now release all. If successful, you will not be able to start the machine by pressing the on button. You will have to reconnect to ac power to start it.

That is all there is to it.

Jul 22, 2008 | HP iPAQ H5550 Pocket PC

1 Answer

IPAQ 5550


Performing a Full Reset A full reset is sometimes referred to as a ?hard reset.? Perform a full reset when you want to clear all settings, programs, and data from RAM. A full reset deactivates the battery. The power button does not function until the battery is reactivated. CAUTION: If you perform a full reset, your iPAQ Pocket PC returns to its default settings and loses all information that is not recorded in ROM. To perform a full reset: 1. Press and hold Application Buttons 1 (Calendar) and 4 (iTask) on the front of the unit and, at the same time, use the stylus to press the Reset button on the bottom of your iPAQ Pocket PC. 2. Hold all buttons until the displayed Full PDF document can be found here: http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpia8006/lpia8006.pdf

Aug 19, 2007 | HP iPAQ H5555 Pocket PC

1 Answer

Forgot my PASSWORD Pocket PC


You will have to perform a hard reset. You will loose all data from the iPAQ, and it will be restored to factory conditions. Hopefully, you've got a backup on a PC or a storage card that you can restore your data from.

Sep 12, 2005 | HP iPAQ RX3715 Pocket PC

Not finding what you are looking for?
HP iPAQ H5550 Pocket PC Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PDAs Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Bob S

Level 1 Expert

15 Answers

Are you a HP PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...