Question about RCA D52W19 52" Rear Projection Television

1 Answer

I was playing with the menu on the tv. and i was being curious and i had ended up locking the front buttons. and we dont have the remote control to the tv no more.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

RCA makes several universal remotes that are sold by a variety of stores, Target, Walmart, etc. These come with the RCA code already programmed in them. Look for one that has a "menu" function button. You should be able to access the code necessary to unlock the panel buttons.

michtech

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv reset menu


On the front there should be a panel you can open if you dont have a remote. On that panel there should be a reset button.Just press it while the tv is on.

Nov 06, 2013 | Toshiba TheaterWide 52HM84 52" Rear...

1 Answer

Mitsubishi wd62526 tv has a passcode on it that i dont know ;so is there a way to change it or reset it


Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip Lock menus. If you forget your passcode, you can view the locked TV without entering your passcode. This is done by pressing the number 9 and QV buttons on the TV remote control at the same time, when your passcode is requested. This process temporarily unlocks the TV. When entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode. Press HOME to exit the menu.

Bypassing Front Button Lock If you have misplaced the remote control, you can bypass the front button lock by pressing and holding the MENU button on the front panel for more than 8 seconds

Aug 25, 2011 | Mitsubishi WD-62526 Projection TV

1 Answer

What is the code for my Mitsubishi WS-65511 rear projection TV remote control?


Hello

After you set the lock, you need your passcode

to view a V-Chip locked program, view the

locked TV, cancel the lock, or enter the V-Chip

Lock menus.

If you forget your passcode, you can view the

locked TV without entering your passcode.

This is done by pressing the number 9 and QV

buttons on the remote TV control at the same

time, when your passcode is requested. This

process temporarily unlocks the TV.

When entering the V-Chip Lock menu, this

process deletes your old passcode and prompts

you to enter a new passcode. Pressing HOME
at this time will cancel the entire passcode.

Bypassing Front Button Lock

If you have misplaced the remote control, you

can bypass the front button lock by pressing and

holding the MENU button on the front panel for
more than 8 seconds.
OK.

Feb 26, 2011 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Cant turn on set and remote wont work, how can I reset tv and remote to work after our grandchildren locked the fromt buttons ans remote?


hello it sound like the key lock has been activated

The TV can be set up so that it can only be operated with

the remote control.

This feature can be used to prevent unauthorized viewing.

This TV is programmed to remember which option it was
last set to even if you turn the TV off.

Press the MENU button on the remote

control, then use the UP/DOWN arrow

button to select the Special menu.

Press the RIGHT arrow button to activate

the Special menu.

Use the UP/DOWN arrow button to

choose Key lock, then press the RIGHT

arrow button.

Use the UP/DOWN arrow button to select

On or Off.

Press EXIT button to save and return to

TV viewing or press the MENU button to

save and return to the previous menu.

1

2

3

4

5

The TV can be set up so that it can only be operated with

the remote control.

This feature can be used to prevent unauthorized viewing.

This TV is programmed to remember which option it was

last set to even if you turn the TV off.

Language

Main Source

PIP Source

Captions

Caption/Text

ARC

Key lock G

Auto Convergence

Auto Move

F Back Next G

SETUP

VIIDEO

AUDIIO

TIIME

LOCK

SPECIIAL

On

Off

With the KEY LOCK ON, the display

'KEY LOCK' appears on the screen if

any button on the front panel is

pressed while viewing the TV.

This TV is programmed to remember

which option it was last set to
even if you turn the TV off. good luck

regards
shaun

Dec 12, 2010 | Zenith R56W36 56" Rear Projection...

1 Answer

My sis gave me an old samsung tv. It is just for my son and his x-box. Unfortunately there is no remote control. When switched on it is saying PANEL LOCK. Is there any way i can fix this. Model No TI-14N3....


hello you could try this The front panel of the COMBI VISION can be locked to prevent it
from being used by young children for example.
1 To lock the front panel, display the television menu by pressing MENU
( ).
2 Select the SETUP option by pressing the P ▲ or ▼ buttons the required
number of times.
3 Press the + button.
4 Select the PANEL LOCK option by pressing the P ▲ or ▼ buttons the
required number of times.
5 Select ON by pressing the + button.
Result: The buttons on the front panel no longer have any effect.
6 To unlock the front panel, set the PANEL LOCK option to OFF.Another option would be to buy a universal remote from say - Argos carefully open it and use your own batteries and use that remote to unlock the TV then return the remote to Argos or if keep the remote if the original is lost. i hope it helps

regards
shaun

Jan 12, 2010 | Samsung Projection Televisions

2 Answers

Reset hour meter for replaced lamp


push and hold the PIP (same as play) button in the remote control
push and hold the menu button on the front panel of the tv.
Do both actions simultaneously. Of course you have to be close to the tv to do this: pointing with the remote at the sensor AND holding the menu button of the tv panel.
Do this for some seconds and the screen is going to tell you the timer was reset sucesfull and ask you to push exit in the remote control to finish

Apr 08, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

I signed on last night, asked a couple of questions, but the info sent to my e-mail didn't have anything to do with the questions I asked. Noticing in the forum, several people has the same problem:...


Howdy Mike-d. here, mikedee4@gmail.com
Hi CindyCee,

I have tried to post solutions, but they seem to be too long, so I will have to post more than once to get the info to you.

First part- the "Line-In" Video Source thing many people are having fun with. Try these options from the Samsung FAQs website.:

How Do You Switch Video Sources? spacer.gif Depending on the model TV you have, there are up to four ways to change the video source:
  • Through the on-screen menu controlled by your remote
  • Through the on-screen menu accessed through the Menu button on your TV's front panel
  • Through the TV/Video, TV/Component, or Source button on your remote
  • Through the TV/Video or Source button on the front panel of your TV
Your TV could provide any combination of these methods. Instructions for all the methods are below
Changing the Source Using the On-Screen Menu Controlled By Your Remote To use the on-screen menu of your TV controlled by your remote to change video sources, follow these steps:
  1. Turn on your TV.
  2. Press the Menu button on your remote. The Main Menu appears.
  3. Select Input, and then press the Enter button. The Input menu appears.
  4. Select Source List, and then press the Enter button.
  5. Press the Up or Down arrow button on your remote to select the signal source, and then press the Enter button on your remote.
  6. Press the Exit button on your remote to exit.
Changing the Source Using the On-Screen Menu Accessed Through the Menu Button On The Front Of Your TV To use the on-screen menu of your TV accessed through the Menu button on the front of your TV to change video sources, follow these steps:
  1. Turn on your TV.
  2. Press the Menu button on the front of your TV. The Main Menu appears.
  3. Use the Up or Down Ch button on the TV to select Input, and then press the - or + Vol button. The Input menu appears.
  4. Use the Up or Down Ch button on the TV to select Source List, and then press the - or + Vol button.
  5. Press the Up or Down Ch button on your TV to select the signal source, and then press the - or + Vol button.
  6. Press the Menu button to exit.
Changing the Source Using the TV/Video or Source Button On Your Remote To use your remote to change the video source, follow these steps:
  1. Turn on your TV.
  2. Press the TV/Video or Source button. The current source appears on the TV screen.
  3. Press the TV/Video or Source button repeatedly to cycle through the available sources. Stop when you reach the source you want.
Changing the Source Using the TV/Video or Source Button On The Front Of Your TV To use the TV/Video or Source button on the front panel of your TV to change the video source, follow these steps:
  1. Turn on your TV.
  2. Press the TV/Video or Source button on the front of your TV. The current source appears on the TV screen.
  3. Press the TV/Video or Source button repeatedly to cycle through the available sources. Stop when you reach the source you want.
Part 2 -next

spacer.gif

Jan 20, 2009 | Projection Televisions

1 Answer

Front panel locked and remote don't work


To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds

Mar 22, 2008 | Mitsubishi VS-50609 50" Rear Projection...

2 Answers

Front buttens locked and no remote rca d52w19byx1 itc222


when using your remote once you get to where you want to Go to adjust press channel up & down buttons this will let you scroll up and down and then use vol- vol+ to make adjustments.use buttons on front of tv.ThankYou for using FixYa.Have a Nice Day.

Feb 05, 2008 | RCA D52W19 52" Rear Projection Television

2 Answers

Front panel locked and remote don't work


Are you sure there is not a problem with the TV set? The set will need to be on to unlock the front panel. Bypassing the V-Chip Lock on most Mitsubishi sets use a four-digit passcode that is required to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you don't have the passcode, it is easy to bypass. This is neccessary if you forgot the code, purchased the set used, or if you simply don't feel like searching through your files to find it. To bypass the V-chip: You can view the locked shows by pressing the number 9 and QV buttons on the remote at the same time, whenever your passcode is requested. This process temporarily unlocks the TV. To reset the code: When you use the button combination 9 and QV while entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode. Good Luck

Mar 17, 2007 | Mitsubishi WD-62327 62" Rear Projection...

Not finding what you are looking for?
RCA D52W19 52" Rear Projection Television Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...