a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi amynguyen21, You may try this steps to turn off the sound on the DSLR-A300... 1. Press the Menu button, it is the top button on the left of your LCD screen. then go to SETUP 2 (hint: SETUP 2 is symbpolized by a wrench with the numeral number 2) then select Audio Signals then from the options select the desired sound settings.
I think this a problem related to the flex cable that connects the main phone body to the sliding screen. Over time the flex cable wears down as it slides and results in a whole range or problems such as: display acting weird (eg. mirror-image and inverted colours), speaker not working, off-button not working etc.
Flex cables are cheap to buy on ebay (a few dollars) and there's internet sites that show you how to open the phone and replace them. (google: samsung u700 replacement flex cable)
Hi, DONT CUT SIM!
Sim cards on the samsungs slot into sim reader which is found under battery. If you remove the battery you should see where it goes. The slot you are referring to sounds like the memory card slot which is an expansion slot if you want to increase the memory size for file storage. Hope that helps?
POWER DRAIN:-Turn off the printer, Unplug the power cable from printer and from the wall outlet.Press and hold ON buton for 30-60 seconds.
PARTIAL RESET:-Unplug the printer power cable while its ON, press and hold # and 3 button and connect the Power cord while holding.Wait untill the ON light flashes, then release the buttons.
----(for below reset cartridges must be removed out)---------
SEMI_FULL RESET:-Remove the ink cartridges, Unplug the printer power cable while its ON, press and hold # and 6 button and connect the Power cord while holding.Wait untill the ON light flashes,or wait for 20 seconds,hen release the button.If the printer goes off dont worry release the button and Push the ON button.
FULL NVM RESET:-Take the Ink Cartridges out, Unplug the printer power cable while its ON, press and hold OK and CANCEL button and connect the Power cord while holding the buttons.keep Holding the buttons until the printer goes off ,release the button and Push the ON button.
The FLEX (white film strip inside your sliding phone) is already worn out. if your phone is still covered by warranty, it will be replaced for free by any samsung mobile service center, but if not, you have to pay for its replacement..
You may want to print this out because it is long. Adding codes
Adding codes is really pretty simple.
First Add a System Manager code:
Press the 'additional functions' button to the right of the touch screen.
Press the 'system settings' button ON the touch screen.
Press the 'system manager settings' button on the touch screen.
Press the 'system manager' button on the touch screen and then
use the touch screen to enter the system manager's name. Press 'done'
when you have finished.
Press the 'system manager id' button on the touch screen and
use the numeric keypad located to the right of the touch screen to
create the id.
Press the 'system password' button on the touch screen and
enter a numeric password for the system manager. YOU SHOULD MAKE A NOTE
OF THE SYSTEM MANAGER ID AND PASSWORD, AS THIS WILL BE NEEDED TO CHANGE
Press 'next' on the touch screen.
Press 'email address' to add an email address for the system manager.
Press 'contact information' to add an extension to reach the system manager at.
Press 'ok' to complete the process.
Next add user codes:
Press the 'additional functions' button
Press 'system settings' button on the touch screen.
Press 'department id management' on the touch screen.
Press the 'on button' on the touch screen.
Press the 'store dept. id / password' button on the touch screen.
Press 'store' on the touch screen.
Press 'department id' on the touch screen and then enter a numeric code using the keypad.
If you want additional security you can also set up a password
by pressing 'password' on the touch screen and, using the numeric
keypad again, enter the password. The password can be left blank if
Additionally you can set an impression limit for that user by pressing 'impression limit' on the touch screen.
Press 'ok' on the touch screen to add the user.
If you wish to limit impressions then you must press the 'limit impress.' Button on the touch screen.
If you want to add more users at this time go back to step 6.
Press the 'done' button.
Press the 'off' button at the bottom of the touch screen next to 'accept jobs with unknown id.
Click 'ok' to complete the process and start using the copier or go back to step 5 to add more users.
After this process users will have to enter a user id to use the
machine. At the end of the copying process users should press the 'id'
key located at the bottom right of the keypad to logout. The machine
will automatically log users out if there has been no activity for a
few minutes and this can be changed by pressing 'timer settings' in the
While this seems like a lot it actually doesn't take very long to
do. There is a far more elegant set of instructions in the 'reference
guide' that came with the machine, which includes pictures, and starts
on page 4-2.