Question about IBM 6400 Matrix Printer

1 Answer

Controller voltage Problem in IBM 6400 Printer

Posted by on

  • Anonymous Jan 31, 2009

    Error Code is 086 Controller 15V

  • Dennis May 11, 2010

    What is the exact error message that is displayed on the control panel? There are a number of different controller voltage failure errors and with the exact error I can tell you what the failing part is.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 34 Answers

When you power on the printer, do you hear the fans kick in? If you checked the Maint. Man. skip steps 1 & 2, almost 80% of the time its CMX brd, not knowing your 6400 model? Part# for CMX 40mhz 157450-901, older models have 155802-901 CMX 25mhz V5.5...
Oh yeah if u don't hear fans kick in when you first power up, 80% jumps to 95% chance CMX bad.

I hope you have a current configuration print out! it will save headaches and a lot less down time...

Posted on Mar 14, 2009

3 Suggested Answers

  • 21 Answers

SOURCE: IBM 6400 model 050

try part number 170613-001

Posted on Sep 16, 2008

yooperbud
  • 8637 Answers

SOURCE: Error 058 Shuttle Jam on an IBM 6400 Matrix printer

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Posted on Jan 25, 2009

RoryMRP
  • 111 Answers

SOURCE: what does hb control mode on a IBM 6400 printer

usually u get those on mod 14's and up and it could be a few things (i would try in this order from lowest to highest priced) coil temp needs to be set, hammer bank cables, shuttle and or cmx bd need to be replaced. Rory 708-597-4222

Posted on Oct 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ibm 6400-08p matrix printer service centre in tamilnadu where?


Might not find any anymore, IBM has discontinued and no longer supports the IBM 6400 series printers and or any printers at all. If you need some support or printer parts please contact me. Rory 708--597-4222

Sep 15, 2011 | IBM 6400 Matrix Printer

1 Answer

What does hb control mode on a IBM 6400 printer mean?


usually u get those on mod 14's and up and it could be a few things (i would try in this order from lowest to highest priced) coil temp needs to be set, hammer bank cables, shuttle and or cmx bd need to be replaced. Rory 708-597-4222

Jun 24, 2011 | IBM 6400 Matrix Printer

1 Answer

I have an IBM 6400 printer that flashes no hammer bank installed, and then gives me a type mismatch error try download again. I have the hammerbank installed, so I'm a bit confused as to why it would...


it seems your controller bd lost its config somehow. They do that if the NVRAM has gone bad. You might need to replace the Controller bd (CMX BD) Rory 708-597-4222

Jun 15, 2011 | IBM 6400 Matrix Printer

1 Answer

Am trying to install the ibm6400 printer but its not on the printer list what should i do?


There are several sites listed that offer drivers for the IBM 6400. Google IBM 6400 and select any site that looks suitable, try another if it does not offer what you are looking for. Good Luck.

Feb 17, 2011 | IBM 6400 Matrix Printer

1 Answer

My IBM 6400 comes up with the error 086 Controller 15V


Controller voltage failure : either a defective CMX card or Power supply

Jack

Aug 09, 2010 | IBM 6400 Matrix Printer

1 Answer

HI, i HAVE A PRINTER 6400 ibm, but we do not


Contact me : Jack 609-631-4480 i can provide you with assistance on the install

Jun 23, 2010 | IBM 6400 Matrix Printer

1 Answer

How to i change the ip address of an ibm 6400 printer


Hello,
Here is the procedures for entering the IP Address thru Control Panel...
Have any question, you can call 972-907-9771 x311...
8c43e1f.png

Sep 02, 2009 | IBM 6400 Matrix Printer

1 Answer

Need to change the printer ribbon on ibm 6400


BY WWW.IBM.COM/SERVICE

GO ON LINE AND TYPE THE FOLLOWING:

HOW TO CHANGE A PRINTER RIBBON IBM 6400

BEFORE YOU DO ALL THAT FIND THE RIBBON BOX AND SEE IF IT HAS ANY TYPE INSTRUCTION WHAT TO DO?????????

ROD

May 12, 2009 | IBM 6400 Matrix Printer

1 Answer

I need instructions for tractor replacement on IBM 6400 printer


GO ONLINE ASK THE FOLLOWING:

WWW.IBM.COM/SERVICE

IBM 6400 TRACTOR REPLACEMENT INSTRUCTIONS

SERVICE MANAUL IBM 6400 PRINTER

IBM 6400 TRACTOR ASSEMIBLEY/DETAILS

ROD

Apr 02, 2009 | IBM 6400 Matrix Printer

1 Answer

IBM 6400 model 050


try part number 170613-001

Jul 23, 2008 | IBM 6400 Matrix Printer

Not finding what you are looking for?
IBM 6400 Matrix Printer Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Printers & Copiers Experts

Toby
Toby

Level 1 Expert

34 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Brad Brown

Level 3 Expert

13512 Answers

Are you an IBM Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...