- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
that's part/pin lost contact, you need to remove back cover and trace possible lost contact. just concentrate on vertical section as you seen for vertical line on screen. try to resolder all pin on that section.
Best thing to do is to buy a universal remote - preferably RCA/GE brand since it will work without programming.
You should also be able to get to the autoprogram function of the TV by using the front panel buttons.
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
Screen looks 3D Colors don't line up One or more colors
can't be adjusted when using the convergence menu. Screen is bowed or warped.
Here is a quick test.... Using your original remote go-to the TV settings then
go to the convergence section. Try to adjust the red and then the blue
convergence. You should be able to move them up, down, left, and right. If you
can't move them in all directions your convergence chips are bad and should be
replaced. This is a common problem. Solution #1 you need to replace the
convergence chips and convergence resistors. Check the site
www.TvRepairKits.com. They have put together a kit for most models. If you
don't see kits for your set send them a quick note under the contact us button
please, you will get an answer within 24 hours or so.(excluding holidays Good
Luck, if the menu is not there replace the convergence chips also as a pico or so is blown do not replace any blown pico fuses without first replacing the convergence IC'(S)