Question about Kodak EASYSHARE 5100 All-In-One Printer

5 Answers

How do I remove old printhead and install a new one?

How do remove old printhead and install a new one? need directions on how to install a new printerhead

Posted by on

  • Tony Harewood
    Tony Harewood Mar 11, 2009

    Kodak 5300



    Unknown method of Printhead removal - New Replacement sent by Kodak?

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Open the access door at the top of the printer

Remove the ink cartridges

Put your finger in the upper left corner of the printhead ( inside)

you will feel a small latch rigth there push it upward

the printhead will loose and you may now remove the printhead

Posted on Mar 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 350 Answers

What is the Make and Model Number of your Printer?

Posted on Jan 24, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need help removing and installing new printer head on kodak easy share 5100 all in one printer

Posted on Mar 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to get old printhead out to replace with the new one

Posted on Mar 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need dictions on a all in one 5300 kodak printer, printhead removal and installation

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have new printhead.


Hello,

First, go to Canon i9900 Support

If the Support & Service tab is not selected, click on it.

In the search box type reseating printhead and click Search.

One of the results will be "How do I reseat/remove the printhead?"

Click it. A step by step (with animation) will be shown. Just install the new printhead when it calls to reseat the printhead.

Make sure you do the printhead alignment after installing. if you are unsure about how to do this, go back to the support page above and search for align printhead. There will be step by step instructions for this too.

Thanks for using Fixya.

Dec 03, 2009 | Canon i9900 InkJet Photo Printer

2 Answers

How do i remove old printhead and install new one


Replacing the printhead If your printhead is damaged or broken, you may replace it yourself.
  1. Make sure your printer is turned on.
  2. Open the printer access door by lifting from the recessed hand-holds on the sides of the unit. autourg00977009id2130369.jpg
    The printhead moves to an accessible position for handling the ink cartridges. The ink cartridges are seated in the printhead.
    autourg00977009id2128017.jpg

  3. Pinch the latch on the ink cartridge with your thumb and forefinger and lift it out of the print head. Remove both ink cartridges.
    autourg00977009id2128160.jpg

    caution.gif CAUTION:
    Insert the ink cartridges into the newly installed printhead as soon as possible to prevent any drying of the ink.
  4. Unlatch the printhead by lifting the rectangular latch on the top of the printhead.
    autourg00977009id2128257.jpg

  5. Remove the old printhead from the carriage .
    autourg00977009id2128328.jpg

  6. Remove the new printhead from its bag.
    autourg00977009id2128380.jpg

    caution.gif CAUTION:
    Do not touch copper contacts on the printhead, as this may damage it.
  7. Remove and discard the black plastic casing and the orange protective cap.
    autourg00977009id2128411.jpg

  8. Place the new printhead into the carriage.
    autourg00977009id2128461.jpg

  9. Push firmly against the target label on the printhead until you hear it click into place.
    autourg00977009id2128526.jpg

  10. Re install the ink cartridges. As needed, see Replacing ink cartridges.
    autourg00977009id2128574.jpg
  11. Close the printer access door. The printer should now complete a printhead calibration to ensure that it is ready to for normal operation.

Nov 23, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

New Printer - Issue with installing printhead


first of all.. make sure that you remove the packing material from the cart or print heads and put them in properly.
then also if it it gives the same probem then try it with the old print heads.. if it doesnt gives any eror with the old ones then replace the new ones..
new ones are bad..
return them to store

Oct 30, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

How do I remove and replace printhead esp3


cartriges Take them out, push the button on the top left of ph and install new one, pushing on the thumb picture. then install cartriges.

Jun 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Have new printhead to replace old one . need to know how to get old one off. and install new printhead


Go to kodak.com/go/printheadsupport it shows live demo on how to replace the printhead. Enjoy .

Apr 29, 2009 | Kodak ESP 5 Printer

2 Answers

Directions to remove "defective" printhead" for ESP 9-All In One


take the ink out and push the button at the top left of the printhead

Jan 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak ESP 9 All In one Printer Need directions to remove exiting printhead


push the button on the top left of the printhead after removing the black and color ink cartridges

Jan 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Remove printhead


please don't repeat post as i said before, remove both ink cartridges. on the top of the printhead, near the left there is a button. push it and the old one should come out. to put in the new one take all the protectors off and push it in where the old one used to be. push on the thumbprint until it clicks and reinstall the cartridges.

Jan 18, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Need instructions for putting in a new printhead


Hello ahieser,

To remove the old printhead, you need to remove the ink cartridges first. And then remove the printhead by pushing the button at the top of the printhead while disengaging it from the carrier.

^_^

Nov 12, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

12 Answers

Replacing printhead in Kodak 5300 All in One Printer


on this website:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport 

and selecting the second option "installing new printhead".

Nov 05, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

1,105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...