Question about Mitsubishi WD-52327 52" Rear Projection HDTV-Ready Television

1 Answer

Mitsubishi 57" DLP. Replaced bulb, now picture is hazy.

The bulb in my WD57735 DLP television went out so I got a new one and inlstalled it in the TV, now the picture is not as good as it was originallly. The TV is only a lilttle over 2 years old and had a great picture befor the bulb was replaced. Now when there is a bright subject against a dark back ground there is a haze, glare, fog, aura, (take your pick). If the whole picture is bright then it is as if there is a very light fog over the whole picture. Any solutions?

Posted by on

  • Teh Helmet Feb 18, 2009

    My Mitsu WD-52525 (DLP) also has this "hazy" picture problem. I also have a capacitor problem and upon pulling it apart, I saw that the small mirror in the bottom is FILTHY and so is the lens. Once I get the caps replaced, I plan to clean it all up before I put it back together. I'm hoping that takes care of it. I don't know how old yours is but mine was built 10/2004, fairly old.

  • rogerzehren May 24, 2009

    Replaced the bulb and now the picture is hazy. It is somewhat a good picture but definetly not a HD picture. Had the cable tech out and he said it is not a cable problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Mitsubishi Master
  • 1,039 Answers

Cleaning th mirror and lense will remove the haze. This oldel is much older that 2 years though.

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with my Mitsubishi Tv model WD-65638


Youre lamp has failed. you need a new lamp.http://projectorlamps.com/mitsubishi-dlp-tv-bulbs-915b441001-pvip.html 915B441001 PVIP Mitsubishi DLP TV Bulbs

Feb 25, 2015 | Mitsubishi WD Projection Televisions

2 Answers

Mitsubishi wd 60735 dlp tv red lamp light


A common issue and it may be your problem is dust and dirt inside the unit---the set intakes air from the front and exhausts it out the rear==I have seen several of these sets where removing rear cover and taking stthe set outside and blowing it with a air compressor clears the issue.

Fans and other critical items that get clogged or coated with a moderate amount of dust will cause this issue.

Jul 17, 2012 | Mitsubishi WD-60735 Projection Television

1 Answer

I have a dlp 73in mitsubishi tv and i have sparking in the long box next to the bulb housing


check to see if the lamp connectors inside the lamp compartment didnt get pushed back inside the set. If they are still there secure inside the lamp compartment then you will need a new ballast which you can get from www.tvrepairworld.com

Feb 22, 2012 | Mitsubishi WD-73732 73" Television

1 Answer

When the TV first went out there was no picture or sound so I replaced the bulb and had sound and pic for about 6 hrs total between 2 days of watching the TV. So I sent that bulb back and received an...


This tv have a board call the ballast board to help the projection lamp to ignite.U hear clicking noises mean the ballast board is dead,not doing it job igniting the projection lamp.

Jan 17, 2011 | Mitsubishi WD-57733 57" HDTV

1 Answer

I replaced the bulb on my mitsubishi DLP WD-57732 57 in DLP TV. A few months later a white hazeappeared on the screen.


The problem seems to be a malfunctioning DMD module. Do you still have sound when this haze appears? Are all the other controls such as volume up/down, channel up/down operational?

Jan 16, 2011 | Mitsubishi WD-57733 57" HDTV

1 Answer

LAMP JUST WENT OUT


I have a 57" DLP and have replaced the bulb 3 times in 2&1/2 years. I'm not possitive but I think I have 6-800 hrs on it total. Mitsubishi claims it a part they expect to go out, but the told me they typically last about ten yrs. If you have proof of purchase they will send you a new one for free, otherwise it'll cost you about $150 on ebay.

May 29, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Mitsu #WD52327 DLP replaced bulb but hazy picture


Did you clean the small mirror. Dust will cover this mirror and give you a very hay picture. This is easy job and takes 15 minutes at the most. Someone posted detailed destructions on how to do this already if you look for it under WD52525 hazy picture.

May 27, 2009 | Mitsubishi WD-52327 52" Rear Projection...

1 Answer

New bulb/TV still shuts down


Its far more likely the result of the power pwb capacitors that have failed. As the 34 code will appear if the capacitors fail on the Power PWB. You can get the V26 DLP Power repair kit at the following link.with free instructions
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v26-dlp-power-pwb-repair-kit/cName/repair-kits

Apr 30, 2009 | Mitsubishi WD-62725 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52327 52" Rear Projection HDTV-Ready Television Logo

1,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...