Question about Sms COMPAQ PRESARIO M2000 AND AVERATEC 6110 SERIES MOBILE AMD SEMPRON PROCESSOR - SMS2800B0X3LB

1 Answer

Reset my Compaq D51C PC Desktop BIOS

Hi. I was trying to boot from a cd but my keyboard didn't give me the chance to click any key when the message "press any key to boot from cd..." comes to my screen. The key board only works when i become inside the window.
So I tried to reset the BIOS by taking off the battery and the jumper PSWRD for some time.
Now I can't log to windows anymore. Everytime the computer starts it gives me an error message with the number 162 or 163 that says system time error.
Please i need your help as soon as possible.
Thank you.
hi, i have a virus on my computor, i dont have the disk to restore, how to do a factory reset on a compaq persario 6110. tyvee33@gmail.com

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Try shutting down, remove nickle sized battery for 10 minutes and replace.

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant boot to bios or boot menu,keyboard not come on,now just loops.this after win 10 install


Well, your first mistake was installing Windows 10.

Does it reach POST (Power On Self Test)? If not, some of your PC parts are probably not connected properly. If it does, try and manually reset the BIOS on your motherboard. This could be just flipping a switch, or might require to physically replace the BIOS chip. That should allow you to get into the BIOS and set all parameters.

Oct 22, 2015 | Dell Inspiron One 2330 All-in-One Desktop...

1 Answer

Reset bios password


Open the bios and use the keys on the keyboard to delete it. When there is nothing in the box, save and exit.

Oct 07, 2013 | Samsung NC110-A02 Notebook

1 Answer

Hello, My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM Reboot an


It can't locate a working boot disc. Most likely lost communications with hard drive. Look in BIOS again to see it recognizes the drive. If not try re-seating / reconnecting drive.

Feb 16, 2013 | Dell Inspiron N5010 Black

1 Answer

I did a restore to full factory settings but when I restart computer I think I lost the OS. When I restart the log in screen comes up wanting a user name and password which I dont have. I dont have a...


Here are a few things you can do or try Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally. Alternate: From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT. Click Restart when prompted.

http://majorgeeks.com/download.php?det=5710
UBCD4Win is a bootable CD which contains software that allows you to repair, restore, or diagnose almost any computer problem also has a bios reset tool which can remove your password and bios password
you will have to burn it to a disk as an ISO then you will have to boot from the disc During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart (note after you have removed your password you will have change first boot back to your hard drive) Hope this helps

Apr 15, 2011 | Computer Processors

4 Answers

How do i reset the password on my presario cq56


If it is a windows password, I know a amazing windows password recovery tool. You can visit this website: http://www.password-buster.com/

Mar 10, 2011 | Compaq Computer Processors

2 Answers

I have a Compac D300A Desktop you said for me to


If you want to boot your computer with disk you need to set first boot device as your cd or dvd rom.
For that when you power up the computer press F1 or F2 or "del" then you can enter in bios.
Then go to boot option then set first boot device as your cd ro dvd rom .then save settings and exit.
Then put disk in rom then it boot with that disk.
Let me know if you need more assistanse.
Thanks.

Sep 20, 2009 | Compaq Computer Processors

1 Answer

Turned off PC one night working fine. Next time try to use, PC wont boot. No video display, no bios, no posts, nothing. Gateway Desktop GT 5464 w/ integrated video, Intel E2140 Processor, Intel 945GC Mobo....


Have you tried booting it from yor CD drive with bootable software?

Any led flashing anywhere in the computer?

If not, we are talking about energy problem. Try fitting the energy cord firmly, try connecting the battery charger in a different power outlet.

Aug 26, 2009 | Intel Pentium Dual Core E2140 / 1.6 GHz...

3 Answers

Boot failure


Most likely, your hard drive died. Enter the system BIOS to see what it is detecting (or not) for your hard drive(s). If the hard drive is not being detected as I suspect, you could just replace it and reinstall all of your software.

May 29, 2009 | Intel Pentium III , 900 MHz Processor

1 Answer

Error Code


All you can do is Reinstall windows. You should get the Windows Vista Installation CD with your laptop and all you have to do is put it in and restart your computer and when the message that says "Press any key to boot from CD" press a key.

If it doesn't show up, you may have to press a key like DEL or F12 to get the boot sequencer. When you first turn on the computer you should see the Compaq logo. At the bottom of the screen you should see some buttons to press to do things like BIOS and Boot Sequence. You want Boot Sequence. Once in boot sequence, select the CD-DVD and press any key when it says to.

Once in follow instructions or oyu can reply and i will tell you how to install.

Oct 06, 2008 | Compaq Computer Processors

5 Answers

Computer Lock Down


Force your computer to start in Safe Mode. To do that, hold down the F5 key when you start up and keep holding it until you see that your PC has booted to Safe Mode. (Another way to do this is to hold down the F8 key during boot time until you’re presented with the Windows Startup Menu and then choose Safe Mode from the list of options presented there.

When you’re in Safe Mode Windows skips the Config.sys and Autoexec.bat files and loads a minimal set of drivers that lets your PC function at a basic level. Then do a systme restore while on safe mode......

Hope that helps..........

Jul 04, 2008 | Sony Computer Processors

Not finding what you are looking for?
Computer Processors Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sms Computer Processors Experts

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Bill Boyd

Level 3 Expert

31622 Answers

Are you a Sms Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...