Question about Pioneer Elite PRO-1540HD 60 in. Plasma Television

1 Answer

Monitor does not sutn on, power button flashes four times fast.

My pioneer elite 60" monitor gives audio but no video. What can I do to get the monitor to turn on. The red power light flashes once and then quickly 4 times.

Posted by on

  • Scott Wright May 11, 2010

    What is the model number of the unit ?
    You can find it on the back panel or if you can't due to mounting you can find it on the bottom frame on the lower corners. Also it can be on the top of the frame too at the corners. You might just tell me from your owners manual if its around.
    Scott


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 41 Answers

Sorry I know your model number and its a Power Down trouble with the Scan IC's that are in the unit. You need a tech to look at it and he will most likely find a bad Scan IC and it will need to be replaced. This a is a relatively easy fix for him.

Posted on Mar 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have emachines monitor which is not coming on power button fast flicker


Which power button is flickering (your computer, or your monitor).
Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.

Aug 02, 2014 | eMachines Computers & Internet

1 Answer

Hp w2207h


Try a monitor reset. Power off the PC and monitor. Unplug the monitor and hold down the monitor's power button for 30-60 seconds. Plug the monitor back in and then power up the system.
See this... http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/HP-w2207h-monitor/td-p/222913

Jul 10, 2014 | Computers & Internet

2 Answers

On my Pioneer receiver (model # vsx-9100tx) MCACC light keeps flashing and system will not power on. Please advise.


Hi the mcacc light keep's flashing and will not come on. Can you help with this thank you Lee

Dec 22, 2010 | Pioneer Elite VSX-9100TX Receiver

1 Answer

Can my pioneer elite vsx21thx drive 6 ohm speakers the monitor audio rx6s


well yes there is a way to switch to six ohm standard go to pioneer website download a free digital copy of your manual and therin it will show you how to change settings i love my pioneer by the way it rocks

Feb 25, 2010 | Audio Players & Recorders

1 Answer

No picture on Pioneer Elite Kuro 60" inch plasma


my pioneer pdp 505hd tur on ok but the picture no working and no sound ,can you help me please

Aug 22, 2009 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Power comes on but nothing works even monitor


It's probably your ribbon cable is broken. Pioneer replace it for free the 1st time. Contact them to send it in for service. It is a common issue for the Avic N series. If it is out of warranty then the guy on Ebay will fix it for you for around $100. Try SAME DAY AUDIO SERVICE, his name is Rick and he is very reliable. Goodluck.

Nov 22, 2008 | Pioneer AVIC-N1 Car DVD Player

2 Answers

Pioneer Elite Plasma TV


This a factory issue and usually requires service. Most cases it is a bad power supply caused by a surge or powering off and on too fast ... sorry I wish I had better news

Jun 15, 2008 | Pioneer Elite PRO-1140HD 50 in. Plasma...

Not finding what you are looking for?
Pioneer Elite PRO-1540HD 60 in. Plasma Television Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...