Question about Zanussi Washing Machines
The machine is leaking constantly
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is'nt any adjustment on those machines. They were fitted with eleastic belts. Is the belt not tight enough, you need a new belt.
Posted on Jan 23, 2008
SOURCE: Zanussi F1045W Front Load
indicated low water pressure from your external supply or blocked filters in the fill hose. turn water off, remove hose and check filter in end of hose - it is just a bit of gauze. also look into the valve and clean out if needed
Posted on Jul 20, 2008
Hi there.....the problem could be ...(a) something traped between the inner and outer drum....usually a bra wire....(b) Debri in the drain pump can result in grinding noise...(c) CRACKED inner drum spider unit..and or failed main bearings..test for this by opening the door with appliance switched off place your hand at outter edge of inner drum and test for lift in drum..there should'nt be any lift at all
regards Sir Galahad
Posted on Aug 12, 2009
Testimonial: "thanks for the response think it would be the drum spider unit as i can lift drum from inside thanks again"
Tips for a great answer:
Apr 01, 2011 | Zanussi F1045W Front Load Washer
Mar 07, 2011 | Zanussi F1045W Front Load Washer
Mar 13, 2010 | Zanussi F1045W Front Load Washer
Aug 12, 2009 | Zanussi F1045W Front Load Washer
Jul 20, 2008 | Zanussi F1045W Front Load Washer
Apr 05, 2008 | Zanussi F1045W Front Load Washer
Jan 23, 2008 | Zanussi F1045W Front Load Washer
Aug 17, 2017 | Zanussi Washing Machines
15 people viewed this question
Usually answered in minutes!