Question about Sanyo DP26649 26 in. TV
My Sanyo DP26649 TV developed a problem tonight. The screen goes back and the sound becomes a very loud static. This lasts for a few seconds and the picture and sound go back to normal. Any ideas?
Most likely you will need to get a diagnoses performed on the set. Your problem could be with either the main board or power supply board. The million dollar question is do you repair or replace? With parts and labor to repair this set, you could come out cheaper replacing it.
Posted on Jan 20, 2013
Testimonial: "I checked with a local shop and was advised that repair would be more expensive than replace. Thanks."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: sanyo dp50747 Plasma HD TV
sanyo recommends using the reset button with cable box on, vcr off and press the reset button 2x, then try pressing channel up button if no message appears on the screen. i have not trid it yet... but good luck
Posted on Oct 07, 2008
Hi there! The panel may be in protection mode. The Inverter board is the most logical area to start after checking power supply Voltages.(5,6,24 and 13Volts). There may be coils on the Inverter Board which have bad soldering or faulty. Other than this it may be main board which controls switch on or off. If all else fails, refer to a repairer. Beware of High Current!!! Best Wishes and Good Luck, Jus004
Posted on Aug 23, 2009
This set has LG insides, it will have failed on either the Y-Sustain PCB or the Z-Sustain PCB.
Repair estimates should be $250 - £350 depending on which has failed.
Stick it on eBay, it will fetch good money faulty.
Posted on Sep 06, 2009
Testimonial: "Thank you for your response. We were driving ourselves nuts - fuzes checked out fine and not other guess where to turn. We appreciate your help!"
your site is a joke...make u seem as u can help and then got to subscribe and pay....put that on site beforehand so we don't waste our time with ur garabge
Posted on Dec 15, 2009
Power supply board is dying not giving the tv correct voltage anymore.The power supply board,that the board power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Posted on Sep 10, 2010
Tips for a great answer:
Sep 05, 2015 | Sanyo DP26649 26 in. TV
Apr 20, 2013 | Televison & Video
Oct 22, 2012 | Sanyo DP26649 26 in. TV
Aug 25, 2012 | Sanyo DP26649 26 in. TV
May 16, 2011 | Sanyo DP26649 26 in. TV
Aug 09, 2010 | Sanyo DP26649 26 in. TV
Jul 21, 2009 | Sanyo Televison & Video
564 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: