Question about Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

Service/error code 130 on Fisher & Paykel intuitive eco washer

Doesn't come up everytime I wash, but when it does, with a lot of messing around it starts washine no probs. But what is error code 130?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

Rotary position sensor fault. underneath the machine. Unbolt plastic cover with 16mm socket all of the plastic will come off. Undo four 10mm bolts around shaft. Pull off the big round thingy with cooper wire on it carefully. The purple wire is connected to the sensor which looks like a computer card and fits between the copper things ,pull up the sensor carefully and unpug the connection clean off the blue stuff on contacts,use electrical spray cleaner. Put back together in reverse.
Comments: Aug 03, 2009 - if it still doesnt work reset the machine by turning it off at the wall and waiting 2mins and start again. If that doesnt work the sensor may need replacing.

Posted on Aug 22, 2009

  • 2 more comments 
  • baka_leota Feb 05, 2011

    What is a code 130, did that work?

  • Joe Bennett Feb 06, 2011

    yes but in the end i had to change the stator the big round thing and the outside piece with the magnets in it as i think they were warped and the stator wasnt spinning freely which meant it keep hitting a high point causing it to stop. 130 is the rotary position sensor fault.

  • baka_leota Feb 06, 2011

    Hey, thanks for the udpate....guess when it comes to calling the tech, thats gonna cost heaps.... :(
    Thanks again and I think I will try and do what you did and hopefully thats gonna work.

  • aio val May 16, 2013

    so what seems to cause this error 130 to happen?...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My daewoo washin machine shows error code OE & it wont work actually whats the problem ? tq


Error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. Remove the suspected hoses and clean out. Replace and your good to go.

Nov 21, 2016 | Daewoo Washing Machines

1 Answer

After starting briefly, why did it suddenly stop?


I know it is an old post but this will help the fault code lights 1 and 7

130. (10000010) Phase 1 to 6 - Single Rotor Position
Sensor Error
The Motor Control Module has found an error in the pattern received
from the Rotor Position Sensor. Likely causes of this fault are a bad
connection on the harness between the Rotor Position Sensor and the Motor Control Module, or a faulty Rotor Position Sensor.
Watch this video if you are good with fixing things
Fisher and Paykel 130 10000010 Error Code Fix

Jun 06, 2015 | Fisher and Paykel Washing Machines

2 Answers

Error code 130


IF a Fisher and Paykel, see this link:

http://ths.gardenweb.com/discussions/2427379/fisher-and-paykel-gwl11-error-code-130

You need to list brand (if not also model number) when you post white goods questions. Codes are specific to a manufacturer.

Mar 04, 2015 | Washing Machines

1 Answer

Error code 2h


It not an error it sound like it on a delay of 2 hours

check out http://www.ehow.com/info_8759839_ge-dishwasher-error-code-2h.html

Mar 30, 2014 | Whirlpool Washing Machines

1 Answer

Error code 130


Rotary position sensor fault. underneath the machine. Unbolt plastic cover with 16mm socket all of the plastic will come off. Undo four 10mm bolts around shaft. Pull off the big round thingy with cooper wire on it carefully. The purple wire is connected to the sensor which looks like a computer card and fits between the copper things ,pull up the sensor carefully and unpug the connection clean off the blue stuff on contacts,use electrical spray cleaner. Put back together in reverse.

Oct 22, 2012 | Fisher and Paykel Washing Machines

2 Answers

My daewoo washin machine shows error code LE & it wont work actually whats the problem ? tq


my daewoo washing machine has error code LE
after every wash , it cannot rinse and spin then show
beep sound and show code LE. Thank you

Oct 06, 2010 | Daewoo Washing Machines

1 Answer

Door error on maytag front loader washing machine


that is the emergcy door release once the door is closed it will eset it self what is the Model Make and code you are getting

Aug 02, 2008 | Washing Machines

1 Answer

Indesit washeing machine


Karen, that was nice.........

May 31, 2008 | Indesit W 123 Front Load Washer

1 Answer

Fisher & Paykel Washing Machine IWL12


130 rotary position switch fault 136 motor fault

Apr 29, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Washing Machines Logo

3,112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...