Question about LG 42LG50 42 in. LCD HDTV

1 Answer

Xbox 360, hdtv, surround sound assistance

I am trying to hook up all 3. Right now, i have an hdmi running from my recvr to my tv and an hdmi running from my cable box to my tv. this leaves me using the cords that come with the xbox360 into my tv and the picture is horrible

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 267 Answers

Since the reciever does not show any picture use that hdmi input for the x box. and component inputs for the reciever.

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phillips HDTV turns off when we turn the XBOX 360 on.


More than likely this is a trigger from the HDMI cable which can be disabled in the tv or xbox settings. To check, hook the xbox up to the tv with RCA cable that is supplied with the xbox and see does it turn the tv off it probably wont happen when connected like so.

Jan 08, 2015 | Philips Phillips 40 in. LCD HDTV

1 Answer

Hook up xbox 360 tv


What kind of receiver? Do you have anything else like DVD player going thru receiver? My receiver has 3 hdmi in and 1 out (to tv) so all those equipment would just go to "hdmi" on tv.
Another way to do it is put your tv on exterior audio... for all sound to go thru your receiver.

Jan 05, 2014 | Flat Panel Televisions

1 Answer

Xbox 360 with HDTV (Panasonic plasma TV) help!!


It sounds that the video settings to TV should be checked. Refer its user manual for details.

Jun 16, 2013 | Panasonic Flat Panel Televisions

1 Answer

I have succesfully connected my dynex 32" lcd hdtv 720p 60hz to my rogers digital box and my xbox but i only have room to connect my audio cables for my surround sound speakers to my tv cables there is no...


What cables are you using for the XBOX and the digital box? What surround sound system are you using (what receiver)? Which model of Dynex 32" TV do you have? Looking at the DX-L32-10A, I can connect both devices to the TV and then the audio out to the surround sound system.

If HDMI, then that will carry the audio to the TV and then you would need an audio cable from the audio out on the TV to the surround sound speakers. Similarly, if you use component video and the audio cable combination, there are 2 component video jacks and 3 audio-in jacks on the rear of the TV. Then connect another cable from the audio out of the TV to the surround sound system. (This TV has one audio out and a headphone jack.)

If you previously had the audio going from the Rogers digital box directly to the surround sound system, you need to reroute things unless there are two or more sets of audio in jacks on the surround sound system. Some surround sound system can take several HDMI in cables and then route it to the TV on a HDMI out port.

Without more information, I can't be sure of the best option for your cables.

I hope this gets you started and please provide more information for additional suggestions.

CIndy Wells

Sep 17, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Lose sound on phillips hdtv unless xbox360 is turned on


Common short the cover cap over the video & sound boards short out if you remove it the cap only (shield metal) it usually will fix this

Jun 06, 2009 | Philips 42PFL7422D 42 in. LCD TV

1 Answer

Can't connect XBOX 360 please help!


How many video ports does it have? You may have to search through video 1, 2, 3, or switch the TV itself to component/HDMI depending, with the remote. Should be with an 'input' button.

My tv has a list with HDMI, SVIDEO, COMPONENT, PC, ect. and its a 1080p one, im just assuming all HDTV's have a list

Feb 05, 2009 | JVC LT-47X788 47 in. LCD HDTV

2 Answers

Need hook up diagram for Samsung HDTV using HDMI with Cable box and Samsung 5.1 Surround Theater System


you can run a fiber optic cable out of the tv into the surround system if the sytem has a fiber optic input, or your tv should at least have red and white rca cables for audio out, then you just pick any input on the surround sound and any audio from dvd players ect thats hooked up to the tv will be sent through that one input on the surround sound. The only thing you'll have to do is turn the volume up or down on your sound system.

Jul 09, 2008 | Flat Panel Televisions

2 Answers

Audio via hdmi


Have you tried to hook up your DVD player directly to the surround sound system? If you direct the sound through the TV, it has to pass several circuits and the quality will be lover. Just connect it right away to your sound system. :-)

May 21, 2007 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

Not finding what you are looking for?
LG 42LG50 42 in. LCD HDTV Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...