An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
An expert whose answer got voted for 20 times.
Re: please help me!!!
The problem is caused by a loose cable connection or the connection from the main board of the phone to the camera not being connected correctly or not at all. The easiest fix is if you have a repair store near by you can drop it off and have it fixed or if you know your way around electronics you can just reconnect the flex cable to the board and viola it will work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, this isn't a solution but it might help explain the possible problem. The v3x camera has a connector in order to connect it to the rest of the phone parts. If that connector is loose or possibly has broke you will get error messages. The only way to know is to have a technician take the v3x apart and check. The V3X is not as easy as the v3 or v3xx to take apart and you must have the correct tools. If needed the camera unit can be replaced so that you don't have to purchase a new phone. If you can find a technician in your area you can ask if he has a v3x that he uses for parts. It would be less expensive. Good Luck.
there is two option trun off your mobile and remove your battry again turn if on this may fix it.
The other option is more possible to solve it you have to make master reset your mobile if there is no hardware problem this it 100% chances it will start working.
Remember to safe your all contects and messages all other thing before master reset.
Hope this will help you.