Question about Philips PSS110/17 MP3 Player

2 Answers

Problem please connect to computer

Pc maneger cant not pss110 to connect

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Conecting to downelownecin

Posted on Jun 16, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Download the newest version of the Philips Device Manager:
www.usasupport.philips.com - change your country/language as needed
Enter in your exact model #
Click on the link for your exact model #
Click on the Software & Drivers section
Click on "Firmware Upgrade Software"
Install the new Device Manager
Open and run the "Repair" tab

If still nothing:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.


If these methods fail, call Philips to see if you are still in-warranty.


-Tha Mp3 Doctor

Posted on Mar 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi there ! I've connected my Philips PSS-110 with my computer, I tried to delete the songs that were on it , and I couldn't see them , so I formatted the Philips PSS. After that I transfered some mp3-s...


Hello,

Looks like the player's functions have been deranged after it's been formatted.
Upgrade the firmware by using the PSS Device Manager.
Go to the support site for downloading and installing this device manager onto your computer.
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=PSS110/37&slg=en&scy=US
To get to the download for the firmware upgrade
open the link in a new page and
accept the End User License Agreement ( EULA )

Install the upgrade onto your computer and follow the steps.

Aug 07, 2010 | Philips PSS110/17 MP3 Player

2 Answers

Firmware


The firmware has corrupted.

Run the Philips Device Manager, installed from the driver CD.

Connect the PSS110 to the mains and PC, when the Philips Device Manager registers that the device is connected click on the Restore option, and follow the on-screen prompts.


This will format the device and replace the corrupted firmware.


NOTE: ANY TRACKS WILL BE DELETED

Apr 25, 2009 | Philips PSS110/17 MP3 Player

1 Answer

Cant turn my phillips pss110 after taking it out of the computer


does the device immediately shut off after displaying the Philips boot screen? if so, the mydb internal database file may be corrupt or missing.

Get the free program "ShoqBox Buddy" and use the "rebuild database" function to see if that fixes it.

Nov 03, 2008 | Philips PSS110/17 MP3 Player

1 Answer

Displays "Problem!Please connect to computer"


Download the newest version of the Philips Device Manager:
www.usasupport.philips.com - change your country/language as needed
Enter in your exact model #
Click on the link for your exact model #
Click on the Software & Drivers section
Click on "Firmware Upgrade Software"
Install the new Device Manager
Open and run the "Repair" tab

Nov 01, 2008 | Philips PSS110/17 MP3 Player

2 Answers

Philips pss110/05 problem connect to computer


This model is completely incompatible with Vista, and your problem ultimately will probably not be solvable.

Make sure the hold/lock is not engaged
Try another USB port
Reset the player

If that fails:
Download the newest version of the Philips Device Manager:
www.usasupport.philips.com - change your country/language as needed
Enter in your exact model #
Click on the link for your exact model #
Click on the Software & Drivers section
Click on "Firmware Upgrade Software"
Install the new Device Manager
Open and run the "Repair" tab

If still nothing:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.


If these methods fail, call Philips to see if you are still in-warranty.


-Tha Mp3 Doctor

Sep 30, 2008 | Philips PSS110/17 MP3 Player

4 Answers

Pss110/5 system problem


The PSS110 is not fully compatible with Vista.

You can download the Philips Device Manager for the PSS110 from:

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=GB&slg=ENG&cat=MP3_PLAYERS_CA&sct=SHOQBOX_SU&session=20080627080823_82.5.154.61&grp=PORTABLE_ENTERTAINMENT_GR&ctn=PSS110/05&mid=Link_Software&hlt=Link_Software

The software is not Vista compatible so you will have to run it on an XP machine.

Run the Device Manager and select the repair option. This will update the firmware and replace the system files.

Make sure the player is connected to the mains during this process.

Use the Philips Device Manager

Jun 16, 2008 | Philips PSS110/17 MP3 Player

5 Answers

Windows Vista


The PSS110 software does not work with Vista, and there is no driver update.

The only way to use the PSS110 is on another XP system.

May 23, 2008 | Philips PSS110/17 MP3 Player

1 Answer

Help


Install and run the Philips Device Manager. Select the restore option and follow the on-screen prompts. This will format the device, and re-flash the firmware.

Mar 08, 2008 | Philips PSS110/17 MP3 Player

3 Answers

Phillips pss110/05


hello, i found the original cd that came with the mp3 player, uninstalled musicmatch and pss device manager, disconnected from the internet and reinstalled everything on the disc. i then reformatted the device and had to go into settings on the portable device option in musicmatch and selected pss 110 rather than flash. the device works now although i had to select the 'add' from portable device rather than sending to it from musicmatch jukebox.
hopen it works for you. you may have to keep selecting the pss option as it seemed to re-set itself as a flash device a few times. john

Dec 12, 2007 | Philips PSS110/17 MP3 Player

Not finding what you are looking for?
Philips PSS110/17 MP3 Player Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips MP3 & Digital Media Players Experts

Herby0802

Level 2 Expert

48 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

mac colar

Level 2 Expert

421 Answers

Are you a Philips MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...