Question about Delphi MyFi SA10113 XM Radio Receiver with Home and Car Kit

1 Answer

Static sound or no sound with FM Trans and with Audio Plug

I've been using my MiFi XM2go for year without a problem. In the past week or so I've been getting just static or no sound at all with an occasional glimpse at the station on the XM. The bars on the screen show its got the signal and the information about the song/show is right there, so I know the signal is coming in. I was told by XM that I should get the Sure Connect or an XM FM Modulator Relay, but wouldn't this only be a problem with the FM Transmition. I've used the plug for the tape deck and have the same problem. I know its only $20, but I'd rather put that towards a new unit if I know this wont fix the problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers

I agree with you. It sounds like an internal audio circuit problem, especially if the tape adapter does the same thing. Have you tries headphones on the unit? If they work, then get the sure connect as it plugs into the headphone jack (Aux out jack)

By the way, you as an XM customer for years, usually XM will just give you another unit to keep you as a customer. I've seen it many times. Couldn't hurt to ask!

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tao xm2go unit is transmitting a very weak fm signal to my car radio. I can barely hear the audio.


You likely need to directly connect. In most cases the FM transmitter is too week to broadcast through FM stations, and a direct connection will clear up your issue. It could be as simple as connecting via an Auxiliary cable or Cassette Adapter. If you don't have the ability to use one of those, you can get an Auxiliary Input Adapter. Another solution would be an external FM Transmitter, with a larger range.

Jun 26, 2012 | Tao XM2go Satellite Radio Receiver

1 Answer

HOW DO I GET RID OF STATIC IN MY STILETTO 2 CAR DOCK


First, you have to find out if the intereference is coming from your power supply or your FM radio. Are you listening to the Stiletto2 on your car FM radio? Is you car FM antenna visible? First try using a different FM frequency - that is the most simple fix. Second, if you car radio has an "AUX" input jack, use that to eliminate static. If the interference is from the car ignition, that is most difficult to eliminate, but you can try a clip-on ferrite ring on your power cord.
In summary, try a different FM frequency, 2nd, try using an AUX input cable, and if you've done either of those, then the noise may be in the power. Make sure to turn the AUDIO OUPUT level of the Stiletto2 all the way up so that your car radio won't have to be up so loud. Go luck, and let me know if this works for you. Happy New Year too!
JohnnyElectron

Nov 26, 2010 | Audio Players & Recorders

1 Answer

My Delphi XM2GO MyFi has stopped transmitting to an FM station on a house radio. Is it repairable? If so, is there a facility in the Cleveland, OH area where I can take it?


IF you take it out of the home dock and run it on batteries, I'll bet you it works again. The newer home docks TURN OFF the FM transmitter. Try a car dock, or try it with just the power plug plugged into the bottom of the MyFi, without the home dock and see if you can now get the FM transmitter to work. Let me know. Thanks and good luck.

Aug 09, 2010 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

I would like to connect my antenna directly to my XM2GO unit without the docking station. Where can I find an adapter?


Simple. Go to http://xmfanstore.com , click on "Antennas and Extensions" under "Shop Categories" on the left most side of the site; there you will find "XMFanStore XM2go Direct Connect Antenna Adapter" .

It plugs into the SIDE antenna port of your XM unit and you plug the antenna into that.

This URL MAY be a shortcut:

http://store.xmfanstore.com/directconnect.html

May 27, 2010 | Pioneer AirWave XM2Go Satellite Radio...

1 Answer

Some stations have static


Are you using the FM modulator? Try using a different FM frequency, or use the 'audio out' jack and a cassette adapter. If you plug headphones into the unit, do you still have static?

Dec 28, 2009 | Sirius Satellite Radio Audio Players &...

2 Answers

My mifi XM2go radio will not turn on. I have


Sounds like a bad battery. Try plugging DC adapter directly into the bottom of the unit and turn it on - does it still act-up? If so, bad radio; if it works with adapter only, then battery and charging issue.

Dec 20, 2009 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

Turn on fm transmitter for Pioneer Inno XM2GO


Have you gotten it fixed? You did have it in a car dock, right?

Aug 18, 2009 | Pioneer XM2go Inno Satellite Radio...

1 Answer

MyFi FM Modulator Stopped Working?


hi there..there are few ways on installing xm into your car..you can use the FM Modulation that you're doing before..it goes like this...make sure that you're xm radio is turn off( with all the wirings unplug).....then, you just have to go on a blank channel(e.g 90.1) on your car radio...afterwhich, turn on your xm radio and go to MENU....and look for FM settings...and select the same frequency you have into your car radio...and just have to wait for 5 to 8 secs and you should be getting the prev. channels.....
IF: you're only getting prev. channels such as 1, 130 etc...you just have to call xm to send a refresh signal OR you can go to www.refresh.xmradio.com if you want to save more time...just type in your 8 digit radio I.D....


IF:
you're not getting the FM settings.....you just have to click the MENU and select the 'default settings/factory settings' then turn off/on your radio to save the changes...

i'm sure it'll work nowq at this time....Godbless!

Aug 23, 2008 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

AC adapter cut out ? Home docking station


I have this problem too with my TAO xm2go, and that company is no longer around. But, after searching, I found there is no solution for this problem. Sorry!

Jan 18, 2008 | Pioneer AirWave XM2Go Satellite Radio...

Not finding what you are looking for?
Delphi MyFi SA10113 XM Radio Receiver with Home and Car Kit Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi Audio Players & Recorders Experts

John
John

Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4724 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Delphi Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...