Question about Primera Technology Signature Z1 56300 Thermal Printer

Open Question

Primera signature Z1

Problem we installation av Primera Signature Z1

Posted by on

2 Suggested Answers

Code Blue
  • 86 Answers

SOURCE: I have downloaded avs video

try cleaner and advanced system care after you uninstall it and then again after you do install it.

Posted on Mar 19, 2009

  • 4924 Answers

SOURCE: I need a Windows 7 driver for my Primera Signature

if you only see those on the official web site and install the vista driver ...usually the compatibility is around 80% and you have all chances to work ...if it will not ..probably it is not released yet ...But I said for most devices the vista driver work on windows 7..

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

Driver for window 7

Hi k12chandan20, there is a software called Ma-config who can detect and download automatically the drivers. Download this software and use it. it's free
that's the link:

Sep 20, 2012 | Kyocera FS1128MFP AllInOne Laser Printer

1 Answer

Drivers windows 7 printer signature Z1

Here ya go! Here is a link to drivers for both Windows XP and Windows 7. The Windows 7 driver requires a software key. The site indicates that all you have to do is call tech support (number on the site) and ask for a free key. Here you go:
I hope this response helps you out.
I wish you the very best of luck! If I can help you further, please let me know.
I strive for '4 Thumbs Up'! If I've assisted you, I'd greatly appreciate you taking the time to provide me with a favorable rating. Thanks so much!

Jun 24, 2011 | Primera Technology Signature Z1 Printer

1 Answer

How do I set my signature on my Samsung Acclaim?

Depends on the firmware yours may not have this feature. Go to the menu, message settings, then scroll down to signature.

May 03, 2011 | Office Equipment & Supplies

1 Answer

I have a primera signature 4 ink jet CD printer. It will not print and the left green light on top is flashing very fast.

The printer lighting symbol indicators are messages of replaceable resources either paper or ink. usually the printer is expected to perform until a fault displays a logo either green for functionality, pink of resources shortage, and red for power resources insufficiency. Checking on the printer compartments to ascertian the conditions or replaceabel resources paper, ink, or jams due to paper over loads. Computer messages with printers would display the fault. For example, a printer message on the computer either as print job request unsuccessful or requirng software would be observable from the computer screen.

Jan 14, 2011 | Primera Technology Primera SignaturePro CD...

1 Answer

Microwave starts but didnt heat anything

The magnetron (the part that heats the food) may be bad or the circuitry to the magnetron may have burned out. Basically my advice is that if you have no electrical expertise, it isn't worth fixing. The magnetron if bad, costs almost as much as a new microwave. If you open it up (make sure it has been unplugged for a few hours and don't seen any obvious burnt parts (including a fuse and the diodes), then most likely the magnetron is done and a new microwave is the way to go.

Let me know how this works out for you.


Aug 18, 2010 | Primera Technology Signature Z1 56300...

1 Answer

Ink is boiled over, can I still use it?

your printer nedds early as possible.local printer repair shop can do that servicing for you. to avoid further damage please do not use the printer till it gets serviced.the main board can go short if used in the same present condition.

May 04, 2009 | Primera Technology Signature III InkJet...

1 Answer

Install z615 lexmark printer with no disc

Hello markr,
You can download the full drivers by check those out:
Signature Z6 version 1.01 For Vista
Signature Pro version 1.20 For XP/2000
Signature Pro version 1.01 For Windows 98
Thanks for using FixYa.

Dec 23, 2008 | Primera Technology Signature Z6 InkJet...

1 Answer

My primera sig IV interior red lights stay on...

The interior light is part of the cartridge optical reader assembly and tells you that it isn't recognising the ink cartridge. Either they are the wrong cartridges or the bar code at the bottom of the cartridge is unreadable. Using a cotton bud dipped in a bit of metho wipe around the red and clear led's ensuring you clean the small slot next to the led's (the reader). Also either clean the barcodes on the cartridge, or change the cartridges.

Dec 04, 2008 | MicroBoards Primera Signature IV InkJet...

1 Answer

Printer error message when tried to print test page

You are going to need SP2 to run many applications, doing system restore to before SP2 setup will make SP2 unusable.

If you can install, the printer on a different plug. Uninstall and re-install drivers as suggested on other post, afterward connect printer to new port, drivers will work differently.

You can also try this:

Disconnect printer.

Remove drivers

Uninstall sp2

restart pc

re install SP2

Download and install latest drivers

connect printer

In this way there are less chanches for driver interfeering with sp2. Use last driver version, older drivers may not work well on sp2.

If this had been helpful vote my solution in the other thread. Thanks

Apr 15, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Primera Technology Signature Z1 56300 Thermal Printer Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Primera Technology Office Equipment & Supplies Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Guy Loeffler
Guy Loeffler

Level 1 Expert

4 Answers

Are you a Primera Technology Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides