Question about KitchenAid 24 in. KUDS02FR Built-in Dishwasher
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Float valve is jammed.
Look inside the machine on the floor will be a small float valve. Looks like a small upside down cup. Lift it and clear anything from underneath.
The valve is a safety feature to stop the machine from over filling. If anything gets under the valve it will jam open and stop the machine.
Check for a clog internal or external.
Scoop as much water our as you can. Open the cover on the floor of the machine. Usually just turns and lifts out or snaps out some are screwed in. Take your time and try not to force anything. Look for a clog there.
Check for clog in the drain. The dishwasher will connect to the drain under your sink and run either directly to the drain or into your disposal unit. Remove open the connections and look for a clog. Clear if necessary.
Not the clog?
Water is pumped out by the machine via an internal pump located under the base. If it fails the water will collect until it trips the float valve. First scoop out all the water from the machine and run it again. If water comes in and it runs to the point it fills again and trips the float then either the pump or timer is faulty.
Remove the machine. It will be held in place by screws directly into the counter top. You may have to lower it to get it out. The front feet turn with a wrench to lower.
Turn off the water supply. Run the unit again until you get to the drain cycle.
Connect a test light or voltage tester to the terminals at the pump. Check for voltage at the pump. If you have voltage replace the pump. If no voltage the timer is faulty.
Some can be replaced as a unit others are integral to the control panel. Turn style can be replaced. Touch control can not.
For more help go to my more detailed tip "Dishwasher will not run. DW101 how to fix". Or click on my profile and you will find the link there.
Hope this helped you. Please take the time to rate this tip.
Posted on Mar 17, 2010
Posted on May 05, 2010
Tips for a great answer:
Jan 17, 2016 | KitchenAid Dishwashers
Nov 15, 2011 | KitchenAid Dishwashers
draining issue usually occurs due to kinked drain pipe, clogged drain filter or
drain pump. Check the drain hose for any visible clogging, remove if present.
If no visible lint is present then remove then turn off the dishwasher and remove
the drain hose and check for any visible clogging. If still not visible then
the drain filter or drain pump is clogged and you'll need to clean the drain
filter and drain pump. Also, check for any food pieces stuck near the pump
Please note that
dishwashers don't drain out the complete water such that heating element
Hope this helps...
Please post back for any further assistance.
May 07, 2011 | KitchenAid 24 in. KUDS02FRSS Stainless...
Apr 05, 2011 | KitchenAid Dishwashers
Feb 09, 2011 | KitchenAid KUDR01TJ Dishwasher
Dec 26, 2010 | KitchenAid 24 in. KUDM25SH Built-in...
Nov 05, 2010 | KitchenAid Dishwashers
and type 'Attention: Audrey' in the subject line. Please include your full name and model/serial number, and I would be happy to try to help resolve the situation with your dishwasher.
Oct 25, 2010 | KitchenAid KUDC03FVSS 23 in Builtin...
Apr 04, 2010 | KitchenAid KUDK03ITBK Built-in Dishwasher
Jan 27, 2008 | KitchenAid 24 in. KUDI01TJ - Multiple...
Nov 22, 2012 | KitchenAid 24 in. KUDS02FR Built-in...
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: