Question about Philips 50P8341 50" Rear Projection Television

1 Answer

No Picture or Sound, Beeping coming from the back wont turn off

Just got this tv because someone else was going to throw it away insted of fix it. It powers up, then no picture no sound, nothing at all but beeping coming from the back. Help please, Will get professionally fixed but want to know what it is cause the tv repairmen from this area like to screw you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has answered 200 questions.

  • Expert
  • 317 Answers
Re: No Picture or Sound, Beeping coming from the back...

Sounds like the pwr transformer is defective.

Posted on Sep 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Mitsubishi 4504R TV picture won't come on - no projection

it sounds like a fuse has gone inside it and ues there is fuses inside tv's

ok you wont to search o nthe internet for someone who will fix it for you there are people who work at home and will fix it there for you my stepdad had to do that because he had a similar problem with his except he didnt get sound or audio at all

or you could buy the item of the internt but most people who do the repairs have the part you need lying arround becasue thji problem isnt uncommon

good luck

Sep 19, 2009 | Projection Televisions

1 Answer

Philips 29pt5407/21 tv doesnt start up and its beeping

Sometimes you can reset a TV by pulling the power cord our for about 2 minutes and then try to turn it on.

Aug 23, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

3 Answers

Rca no picture no sound

There is no sound on my rca 60 tv. what can I do. The movel number is P60921.

Jul 30, 2008 | Projection Televisions

1 Answer

No Picture - Sound

I just had this problem fixed. In my case, it was because the insulation on the CRTs was cracked, and when it would warm up, the shielding would separate and would let 5000 volts arc across the main board. This, obviously, damaged the board. The tech didn't catch the arcing right away, so they replaced the main board twice before they used a high-temp RTV to patch the insulation.

The power-cycling was a result of the damaged board.

The point of this story is that the broken part may be a symptom of the real problem.

I hope this helps someone!

May 29, 2008 | Samsung HCN653W 65" Rear Projection...

1 Answer

RCA 32 in TV no picture no sound just a beeping noise TV power is on

The beeping sound is most likely the high voltage generator needing replacement. This is a fairly easy job if you have some tech support to discharge the picture tube. You can go to the following link and leave them an email with your model number and your symptom and they will email you back with the part you need and they provide free tech support with instant messageing so you can do the repair yourself. the HV generator takes about a half hr to replace and takes only the basic soldering ability. heres the link.

May 19, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

Keeps going black and coming back on - green light blinks

Our tv is about 2 1/2 yrs old and did the same thing we had to replace the bulb and bulb driver board this fixed the problem

Jan 27, 2008 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Toshiba 43A61 - No Picture, no sound

If your set all of a sudden won't come on, e.g., the screen is blank, but the LED on the under the screen next to the on/off switch keeps flashing, then there may be an internal fault on the set that needs to be reset.
To force the reset, try this:
  • Unplug the set and wait a few seconds
  • Replug and see if the video returns
Whenever the set senses an internal fault through its monitoring circuitry, it essentially shuts down the set. The flashing LED provides the indication that a fault has been detected. Removing power to the set resets the monitoring circuitry. When plugged back in, the circuitry again does a check of the system. If it finds that there truly is a problem, then the set is shut down and the LED will again flash. In this case, you need to call a service tech. Most of the time, however, the unplug/replug routine is enough to get the set up and running.

Dec 11, 2007 | Toshiba 43A61 43" Rear Projection...

3 Answers

Tv wont power up makes a noise but no picture

Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.

Nov 03, 2007 | JVC AV-56WP74 56" Rear Projection...

2 Answers

No picture or sound

sounds like the PTV Small Signal Board.

Jul 22, 2007 | Philips 60P8341 60" Rear Projection...

Not finding what you are looking for?
Philips 50P8341 50" Rear Projection Television Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66413 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides