Question about Audiovox FPE3206 32 in. LCD Television

2 Answers

I have power, but no sound or picture

TV is approx 2 yrs. old. Changed channel and screen went black. Power indicator light works, but there is no sound or picture. I took TV to in to be repaired and was told LCD panel had croaked. Any suggestions?

Posted by on

  • kfjones Apr 23, 2009

    I have the same problem as listed above. No sound, no picture but has power. In fact, it started a few weeks ago, when the TV was turned on,it flickered for about 15 to 20 minutes before the picture came on. Now when trying to turn on the TV - it turns on - but now no picture or sound comes on. I left it on over night and a blue box appeared in the middle of the screen and 2 little red lines were in the blue box. I have someone looking at my TV (a TV repairman) - but he hasn't had any luck or hasn't been able to find anyone to talk to about this problem. Can you offer some advice?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Djchillsync is correct - the power supply on these are really poorly engineered and made. Audiovox is trying very hard to ruin thier reputation by putting ou **** like these sets. Contact them for warranty repairs, you may not get them paid for but you'll be directed to someone that knows what they are doing.

Posted on Jul 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 151 Answers

Hello, thats is not true the power supply might have went out or something else. just cuase it dosent turn on does not mean the screen is bad the tv repair man might be.
if your not dyi or electronicly inclined take it to a qualified plasma and lcd repair shop before you give up on it.
i buy them like this .
if you didnt break your screen and it isnt cracked or shattered
if just went out, it may be a power suply problem try repairing your power supply or exchanging it.
remeber to allways get more than one opinion.


Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lg LCD tv less than 2 yrs old has sound but no picture. What could be the problem? power supply, main board, etc??


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

May 18, 2016 | LG Televison & Video

1 Answer

Sharp LC37D44U Power LED was flashing green. TV would turn on, channel indicator shows in upper right corner, sound good, but screen would be black. Channel indicator disappears but screen is still...


I had the same problem. all the service reset would only make the display come on for a few second with no "k" on the screen - only the channel would show up. I purchased a complete set of board for the lcd on ebay, and started swapping them one by one. The inverter boards were the culpret. Tele working 100% since that board swap.

Nov 16, 2010 | Sharp Aquos LC37D44U 37 in. LCD HDTV

1 Answer

Vizio P50HDTV10A 50 in. HDTV Plasma Television The picture started flashing in and out and then the picture went black. The power light is on, has sound no picture. only 2 yrs old


I repair a tv just like yours with same problem. I replace the x and y sustains boards. If you do replace them, please make sure it is disconnected from power outlet.

Aug 26, 2010 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

While watching tv on saturday, my screen went black and their is absolutely no picture nor sound can you tell me if i can fix it as it is only 3 years old


Any indication of power? red light? blinking light? Sounds like the power supply failed if no indicators on. 3 yrs is an average lifespan for these new sets.... unless you are a tech, it's time for a repair shop. Get an estimate first, sometimes its not worth getting an old set fixed...

Mar 22, 2010 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Change channel, lose picture. power off/on, picture appears


switched HDMI plug from HDMI1 to HDMI2 port and that solved the problem

Oct 11, 2009 | Polaroid Televison & Video

1 Answer

Black screen and no sound on TV


what is the brand, model? try to be specific if you want be helped!!!

Sep 11, 2009 | Televison & Video

2 Answers

LG 47LC7DF Green Light Blinks 16 Times - No Picture or Sound


Well dont keep it on!

By running it after it shutdown and it finally did its last pop that added another $XX to the parts bill.

The control boards (2) have now failed There are burned Capacitors ( pop!) and possibly even a few transistors burned out. This is not a DIY it is a Tech job as once changed these boards require additional tuning of the convergence factor.

Aug 31, 2009 | LG 47LC7DF 47 in. LCD HDTV

1 Answer

Picture went out on TV


you need to change the sustainer boards and TV will be good as new.

Apr 05, 2009 | V, Inc. Vizio P4 Plasma Television

2 Answers

Audio but no video


If the screen is not illuminated this can be from the screen power supply, the main screen driver board, or the screen itself has failed. The service rep will change boards to service this, and adjust as necessary.

The set will require factory level service.

Jerry G.

Aug 20, 2007 | Samsung SP-R4232 42 in. Plasma HDTV

Not finding what you are looking for?
Audiovox FPE3206 32 in. LCD Television Logo

880 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

olayoju victor

Level 2 Expert

191 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Audiovox Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...