Question about Achiever SCS-6 Strip-Cut Shredder

1 Answer

It's screaming at me ~ squealling loudly.

When shredding paper it started this high pitched squealling. How can I get it to stop or fix it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

The cutter wheels in side the machine needs to be lubricated. use a silicone lube. like tri-flo. Spray the lube where you put the paper

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is a high, loud buzzing noise when you feed more than one sheet into the shredder. The paper doesn't feed and the shredder needs to be unplugged to stop the noise. Do I need a new one?


With power removed, inspect the shredding mechanism and remove all residue. If you shredded coated paper or plastic in the past, you may have to scrape out the remains.

Oct 06, 2015 | Shredder Office Equipment & Supplies

1 Answer

Squealing noise


A loud high pitch whine while running the dishwasher means that there is something caught in the chopper assembly. To get to the chopper assembly you need to take the racks out and take the pump apart from the inside of the dishwasher. The chopper assembly looks like a metal grate with holes in it. And it might not even be stuck in the grate but somewhere in the pump area due to the water being pumped out, so the best idea is to take the whole thing apart and clean everywhere. However I do not recommend doing this unless you are completely certain you will remember where the screws and gaskets go, otherwise you risk damaging your pump or house from a leak or improper installation. You have been warned.
Here is Manual onlineManual online

Nov 04, 2013 | Baumatic Dishwashers

1 Answer

When slowing down high pitch noise Hyundai i30 2011


your drivetrain is screaming already. Hope for the best.

Jul 20, 2012 | 2011 Hyundai i30 1.6

1 Answer

Dishwasher starts and gets somewhat filled then starts making a high pitched screaming


Hello,

The reason the dishwasher gives the high pitch screaming is because there is some sort of system error in it.

Try to troubleshoot it from the procedure in the users manual, to detect the fault and fix it.

Take care

Jul 06, 2010 | Maytag 24 in. MDBH950AWS Built-in...

1 Answer

High pitch scream after i260 scans a few pages. Scanning stops


the main board in that scanner is going bad which is why its making the high pitch sound. Time to get another scanner or call Kodak and get a replacement scanner or go back to the store where you got it from and get a new one.

Jan 23, 2010 | Kodak Office Equipment & Supplies

1 Answer

High pitched noise when spinning or slowing down(cat screaming)


Sounds like you have bad bearings. I suggest you get it fixed before it creates further issues.

Feb 26, 2009 | Ariston Technologies AW125NA 13 lbs. Load...

1 Answer

Help! It's screaming at me! It's making a horrible squealling noise. What's wrong and how can I fix it?


most of the time the cutter wheels dry up you need to spray silicone base lubricant down the paper shout like Tri-Flow.

Jan 23, 2009 | Achiever SCS-6 Strip-Cut Shredder

1 Answer

Screams


do you have weather bands on your cb ? you must turn it to the off position (weather bands) or you will here the test signal from
noaa . now you will not get weather alerts.

Jul 26, 2008 | Cobra 29 WX NW ST 40-Channels Base CB...

Not finding what you are looking for?
Achiever SCS-6 Strip-Cut Shredder Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Achiever Office Equipment & Supplies Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

quennie732

Level 2 Expert

393 Answers

ray gallant

Level 3 Expert

40973 Answers

Are you an Achiever Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...