Question about Rowenta DG-980 Iron
How do you I clean the bottom of my Rowenta iron? It has black fabric stuck to it in a couple of places from slacks that shouldn't have been ironed!
Let warm up and spray a good oven cleaner on it and let sit for awail(turn iron off) then it should just wipe off!
Please rate this answer!
Posted on Jan 23, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 03, 2013 | Rowenta Irons
If the iron heats but steams improperly, inspect the soleplate and clean the vents (see below) and flush sediment out of the steam chamber .
If the iron produces too much or too little heat, test the electrical cord . Also test and, if needed, adjust calibration of the thermostat .
If the iron does not spray properly, inspect and clean the nozzle.
If the iron leaks or spits, clean the steam vents, nozzle, and tank.
If the iron sticks to fabric, clean or repair the soleplate. If the iron stains fabric, clean the soleplate, clean the tank with a commercial cleaner, and use distilled or filtered water.
God bless you
Feb 03, 2013 | Rowenta Irons
May 27, 2012 | Rowenta DG-980 Iron
I would try bottled water...
check out this tip...
Cleaning a Steam Iron White Scale and Brown Water
Feb 04, 2011 | Rowenta Irons
Aug 01, 2010 | Rowenta DZ9080 Iron with Auto Shut-off
May 26, 2010 | Rowenta Effective DX1900 Iron with Auto...
Mar 26, 2009 | Rowenta DZ9080 Iron with Auto Shut-off
Dec 29, 2008 | Rowenta Perfect Iron
441 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: